LPC-E2294-1MB

Development prototype board with USB, 4x CAN, RS232, ETHERNET

https://www.olimex.com/Products/ARM/NXP/LPC-E2294-1MB/

MCU: LPC2294 16/32 bit ARM7TDMI-S™t with 256K Bytes Program Flash, 16K Bytes RAM, EXTERNAL MEMORY BUS, RTC,4x 10 bit ADC 2.44 uS, 2x UARTs, 4x CAN, I2C, SPI, 2x 32bit TIMERS, 7x CCR, 6x PWM, WDT, 5V tolerant I/O, up to 60MHz operation
Standard JTAG connector with ARM 2x10 pin layout for programming/debugging with ARM-JTAG
Optional TRACE connector (not assembled)
1MB (256Kx32bit) 12 ns 71V416 SRAM
2MB (256Kx16bit) 70ns TE28F160C3BD70 C3 INTEL FLASH
LCD 16x2 DISPLAY with BACKLIGHT (1MB version)
NOKIA 6610 TFT 128x128 12bit color LCD with backlight (8MB version)
SD/MMC card connector
USB to RS232 convertor, board can take power from USB port
RS232 driver and connector
Ethernet 100Mbit with DM9000E
4x CAN drivers and connectors
UEXT connector for Olimex modules connection - MOD-MP3, MOD-RFID125, MOD-NRF24L01 etc.
RESET circuit with external control of Philips ISP utility via USB-RS232 virtual port
Jumpers for boot select from external memory
Jumpers for ISP/RUN mode
2 BUTTONS
POTENTIOMETER connected to AIN0
I2C 24LC515 EEPROM on board
Two on board voltage regulators 1.8V and 3.3V with up to 800mA current

Native hardware support by eCOS the anonymous eCos CVS tree has this target inside 'olpce2294' eCos target . Here is the link to eCos 3.0 the anouncement . The instructions how to install eCos 3.0 on Linux and Windows
LPC-E2294-1MB test software and basic routines for access to the external Flash/Sram
Ethernut OS port for LPC-E2294 made by Michael Fischer
Adam Dunkel's open source uIP web server ported for EW-ARM
OpenOCD + Eclipse set of projects 1.00 includes make file written in flash for LPC-E2294. The complete list of projects included is here.