≡
LPC-L2294-1MB
Development prototype board with 1MB SRAM, 4MB flash, CAN, RS232, ETHERNET, SD/MMC
| Price | 49.95 EUR |
|---|---|
| 10 - 49 pcs | 44.96 EUR |
| 50 - 10000 pcs | 39.96 EUR |
FEATURES
- MCU: LPC2294 16/32 bit ARM7TDMI-S™t with 256K Bytes Program Flash, 16K Bytes RAM, EXTERNAL MEMORY BUS, RTC,4x 10 bit ADC 2.44 uS, 2x UARTs, 4x CAN, I2C, SPI, 2x 32bit TIMERS, 7x CCR, 6x PWM, WDT, 5V tolerant I/O, up to 60MHz operation
- Standard JTAG connector with ARM 2x10 pin layout for programming/debugging with ARM-JTAG
- 1 MB (256K x 32 bit) fast 10 ns K6R4016V1D SRAM
- 2MB (1MB x 16bit) 70ns TE28F160C3BD70 C3 INTEL FLASH
- Ethernet controller with CS8900A and RJ45 connector (16bit mode with interrupt)
- RS232 port
- UEXT connector
- CAN drivers and connector
- SD/MMC card connector
- All LPC2294 port signals available on extension coonectors
- RESET circuit with exterman control of Philips ISP utility via USB-RS232 virtual port
- Jumpers for boot select from external memory
- Jumpers for ISP/RUN mode
- 1 user button
- RESET button
- Two on board voltage regulators 1.8V and 3.3V with up to 800mA current
- FR-4, 1.5 mm, red soldermask, component print
- Dimensions: 118 x 101 mm ( 4.65 x 3.97")
HARDWARE
SOFTWARE
- Example in Olimex ODS IDE
- Native hardware support by eCOS the anonymous eCos CVS tree has this target inside 'olpcl2294' eCos target . Here is the link to eCos 3.0 the anouncement . The instructions how to install eCos 3.0 on Linux and Windows
- BLINK LED project for GCC+OpenOCD+ECLIPSE
- OpenBLT BOOTLOADER - quick guide how to install a very neat bootloader by Frank Voorburg
- GCC+Eclipse+OpenOCD uIP complete project
- OpenOCD + Eclipse set of projects 1.00 includes make file written in flash for LPC-L2294. The complete list of projects included is here.
