LPC-P1343

FEATURES

Microcontroller

• LPC1343 Cortex-M3, up to 72 Mhz
• 32 kB Flash, 8kB SRAM
• UART RS-485, two SSP, I2C/Fast+
• USB
• 42 GPIO pins
• 4 TIMERS/COUNETRS, CAPTURE, WDT
• Serial Wire Debug
• High-current output driver (20 mA) on one pin
• High-current sink drivers (20 mA) on two I2C-bus pins in Fast-mode Plus
• Integrated Power Management Unit, Three reduced power modes: Sleep, Deep-sleep, and Deep power-down
• Single 3.3 V power supply (2.0 V to 3.6 V)
• 10-bit ADC with input multiplexing among 8 pins
• GPIO pins can be used as edge and level sensitive interrupt source

Board

• MCU: LPC1343 Cortex-M3, up to 72 Mhz, 32 kB Flash, 8kB SRAM, UART RS-485, two SSP, I2C/Fast+, ADC
• Power supply circuit
• Power-on led
• USB connector
• Debug interface – SWD (Serial Wire Debug)
• UEXT connector
• Eight user leds
• Two user buttons
• Reset button
• Prototype area
• FR-4, 1.5 mm, soldermask, component print
• Dimensions:80x50mm (3.15 x 1.97")

DOCUMENTS

• LPC-P1343 user's manual revision C
• LPC-P1343 European Declaration of Conformity
• LPC-P1343 UKCA Declaration of Conformity

HARDWARE

• LPC-P1343 Schematic
• ARM JTAG connector (TOP view)

SOFTWARE

• LPC1343 demo examples project for EW-ARM