STM32-E407  

STM-E407 is a low-cost entry board for developing custom applications with STM32F407ZGT6 Cortex M4 microcontrollers from ST. This board has plenty of resources and all GPIO ports are available on extension connectors, an ARDUINO compatible platform connector is also available.

FEATURES

• STM32F407ZGT6 Cortex-M4 210DMIPS, 1MB Flash, 196KB RAM, 3 x 12-bit 2.4 MSPS A/D, 2 x 12-bit D/A converters, USB OTG FS and USB OTG HS, Ethernet, 14 timers, 3 x SPI, 3 x I2C, Ethernet, 2 CANs, 3 x 12 bit ADCs, 2 x 12 bit DACs, 114 GPIOs, Camera interface
• JTAG connector with ARM 2x10 pin layout for programming/debugging
• Ethernet 100Mbit
• UEXT connector
• USB host
• USB OTG
• SD-card
• Input DCDC power supply which allows operation from 6-16VDC source
• Power and user LEDs
• Reset and user buttons
• 4 full 20-pin Ports with the external memory bus for add-on modules
• Arduino platform with unsoldered headers
• 4 rubber pads for the mount holes
• PCB: FR-4, 1.5 mm (0.062"), soldermask, silkscreen component print
• Dimensions: 101.6 x 86mm (4 x 3.4")

DOCUMENTS

• STM32-E407 user's manual
• STM32-E407 OpenOCD configuration
• STM32-E407 European Declaration of Conformity
• STM32-E407 UKCA Declaration of Conformity

HARDWARE

• STM32-E407 schematic in PDF format 
• STM32-E407 Eagle CAD files and older revisions GitHub released under Creative Commons Attribution-Share Alike 3.0 United States License
• JTAG connector (top view)

SOFTWARE

• STM32-E407 IAR demo code for the new Ethernet PHY
• STM32-E407 IAR demo code with the old Ethernet PHY
• I2C interface example with MOD-L3GD20 for IAR
• Example in Olimex ODS IDE
• ChibiOS officially supports this board