≡
AVR-CAN
AT90CAN128 development board
| Price | 19.95 EUR |
|---|---|
| 10 - 49 pcs | 18.95 EUR |
| 50 - 10000 pcs | 17.96 EUR |
AVR-CAN is an inexpensive way to learn how to use an AT90CAN128 microcontroller from Atmel. It's in a very compact form 60x55mm and the presence of both CAN and RS232 allows the customer to make a bridge between the UART and the CAN networks. All AVR pins are available on extension connectors and the board can be easily connected to a snap-on prototype or to other mother boards where additional circuits are built.
FEATURES
- MCU: AT90CAN128 - 128Kb Flash, 4Kb EEPROM, 4Kb SRAM, 53 GPIO, 32 working registers, a CAN controller, Real Time CLock, four Timer/Counters with PWM, 2 UARTs, Two-wire Serial Interface, an 8-chanel 10-bit ADC, Watchdog Timer, SPI serial port, JTAG interface, five selectable power saving modes
- 5x2 pin JTAG connector for programming and debugging (note that the board has no ISP connector)
- RS232 DB9 female connector and driver
- CAN connector and interface
- User button
- Status LED
- 16MHz oscillator circuit
- 32768 Hz oscillator circuit
- Reset button and circuit
- On board voltage regulator (+5V)
- Power supply led
- Power supply connector
- Extension pin headers for each uC pin
- FR-4, 1.5 mm (0,062"), green soldermask, white silkscreen component print
- Dimensions: 60x50mm (2.36x1.96")
DOCUMENTS
HARDWARE
- AVR-CAN schematic
- AVR JTAG connector (top view)
