≡
GateMateA1-EVB
Development board for CCGM1A1
GateMateA1-EVB is OSHW certified Open Source Hardware with UID BG0000117
Select Product Variant
- GateMateA1-EVB
- GateMateA1-EVB-2M
| Price | 53.00 EUR |
|---|
GateMateA1-EVB-2M has U3 2MB of SPI flash and the surrounding components soldered on board.
FEATURES
- CCGM1A1 FPGA with 20480 logic cells
- PSRAM 64Mbit
- RP2040 processor for programing and debugging
- 2MB configuration Flash for RP2040
- 4 buttons
- USB-C for power supply and programming
- PS2 connector
- VGA connector
- 4 Banks with signals with selectable levels 1.2V 1.8V 2.5V
- PMOD with level shifters
- UEXT with level shifters
- Power LED
- User LED
- 4 sections configuration slide switch
- Dimensions: 120 x 80 mm
DOCUMENTS
- CologneChip web page with datasheet
- GateMateA1-EVB user manual
- GateMateA1-EVB EU declaration of conformity
- GateMateA1-EVB UKCA declaration of conformity
- Important note for GateMateA1-EVB customers purchased before March 1, 2024
HARDWARE
FAQ
- How to program this board?
- Via the USB connector. The board comes with dirtyJtag bootloader already programmed and we use openFPGALoader software to program it. The command we use to program it here is:
sudo ./openFPGALoader -c dirtyJtag blink_00.cfg_LED_BUT.bit
The openFPGALoader reposiotry can be found here: https://github.com/trabucayre/openFPGALoader
Maybe check the instructions here: https://trabucayre.github.io/openFPGALoader/guide/install.html
The dirtyJtag bootloader repo is here: https://github.com/phdussud/pico-dirtyJtag
