≡
MOD-GPS
GPS module based on U-blox 7 with internal patch antenna, 2 meter cable, and an UEXT connector
Price | 19.95 EUR |
---|---|
10 - 49 pcs | 18.95 EUR |
50 - 10000 pcs | 17.96 EUR |
Our new MOD-GPS supports GLONASS, has better sensitivity, and can be powered from 2.7V to 5V. Based on U-blox 7 UBX-G7020-KT chipset. Power consumption is 45-50 mA.
FEATURES
- U-blox 7 UBX-G7020-KT chipset
- GPS & QZSS L1 C/A, GLONASS L1OF,
SBAS: WAAS, EGNOS, MSAS; - 56-channel u-blox 7 engine;
- Cold/Warm/Hot start time: 29/2/1 sec. (average)
- Reacquisition time: 0.1 sec.
- Superior sensitivity: -162dBm tracking
- Ultra low power design (38mA, typical)
- Frequency L1, 1575.42MHz
- C/A Code 1.023MHz chip rate
- Power DC 2.7V-5V, typical 3.3V
- Internal Back-up battery 3.0V, 5.5mAh, Lithium battery
- Back-up Current 7µA typ.
- Update Rate 10 Hz (max.)
- Accuracy Position 5 - 25m CEP without SA
- Velocity 0.1m/sec, without SA
- Time 1µs synchronized to GPS time
- Altitude <18,000m (60,000 feet)
- Velocity <515m/sec (1,000 knots)
- Acceleration <4G
- Motional Jerk 20m/sec3 max.
- GPS Protocol NMEA0183
- Interface serial CMOS, 9600 bps, 8N1
- Build-in low noise, high gain active antenna
- UEXT connector allow this device to be interfaced to all Olimex boards with UEXT connector
- Super-cohesive magnetic for installation
- Operating Temperature -40 °C ~ +85 °C
- Storage Temperature -55 °C ~ +85 °C
- Relative Humidity 5% to 90% non-condensing
- Size: 47.0 (L) X 39.0 (W) X 16 (H) mm
- Weight: 66.6g
DOCUMENTS
HARDWARE
SOFTWARE
- Arduino library and examples for MOD-GPS in stand-alone archive
- Arduino tutorial on U-blox
- For older revisions of MOD-GPS (with different chipset) please visit the wiki page article (document links, instructions, examples and more): MOD-GPS wiki article