≡
PIC32-WEB
Web server with 32 bit PIC microcontrollers with PIC32MX460F512 and 100 MBit Ethernet interface
Price | 18.95 EUR |
---|---|
10 - 49 pcs | 18.00 EUR |
50 - 10000 pcs | 17.06 EUR |
Do not use the "programmer-to-go" button when there is no image on the OLIMEX PIC-KIT3 or MICROCHIP PIC-KIT3 because that might put your microcontroller in an irrecoverable state. We have tested the mentioned scenario and we can confirm it destroys PIC32 chips (using both our and the original Microchip PICKIT3). We don't take responsibility if you break your chip that way. For more info check the following: www.microchip.com/forums/m635420.aspx.
FEATURES
- PIC32MX460F512 microcontroller
- note to connect to Ethernet this board requires MOD-ENC624J600 which is bought separately!
- JTAG connector
- ICSP/ICD connector for programming / debugging with PIC-ICD2-POCKET.
- Reset button
- Reset Circuit
- three User event buttons
- three LEDs
- UEXT connector
- Analogue trimmer potentiometer
- RS232 driver and connector
- Complete web server and TCP-IP stack support as per Microchip's open source TCP-IP stack
- Power plug-in jack for +5VDC power supply
- Voltage regulator +3.3V and filtering capacitors
- Extension header to connect to other boards
- Dimensions 100x60 mm (3.9x2.4")
DOCUMENTS
- PIC32-WEB.pdf - PIC-WEB User's manual
- Microchip TCP/IP AN833 - description of the TCP/IP stack
- PIC32-WEB European Declaration of Conformity
HARDWARE
SOFTWARE
- PIC32-WEB example with TCP/IP stack v5.42 and MOD-ENC624J600
- PIC32-WEB example with MOD-WIFI
- PIC32-WEB examples PSP mode based on Microchip TCP-IP Stack 5.00 modified for PIC32-WEB
- PIC32-WEB examples SPI mode based on Microchip TCP-IP Stack 5.00 modified for PIC32-WEB