PIC-32MX

PIC32 32-bit MIPS 4K core processor from Microchip offers speed and performance at a low cost. This is an entry level board with a PIC32MX340F512 microcontroller on it with 512KB of flash, 32KB RAM, 80Mhz clock, UARTs, PWMs, DMAs. The board has both ICSP and JTAG connectors so it can be programmed with PIC-KIT3 or JTAG tool

FEATURES

• PIC32MX340F512 microcontroller
• UEXT connector for other Olimex modules like MOD-MP3, MOD-NRF24Lx, MOD-SMB380, MOD-RFID125 etc.
• ICSP/ICD connector for programming with PIC-ICD2 or PIC-ICD2-POCKET.
• JTAG connector
• RD232 interface with driver
• Quartz crystals 8 Mhz and 32768 Hz
• Status LED
• User Button
• Reset button
• Power plug-in jack with diode bridge rectifier - the board can be powered with AC or DC power supply
• Wide power supply range on the power jack (6 - 12)V DC or (4.5 - 9)V AC
• Extension slot on every uC pin
• Grid 100 mils
• GND bus
• Vcc bus
• Four mounting holes 3,3 mm (0,13")
• FR-4, 1.5 mm (0,062"), green soldermask, white silkscreen component print
• Board dimensions: (100 x 80)mm ~ (3.9 x 3.15)"

DOCUMENTS

• PIC-P32MX.pdf - User manual
• PIC-P32MX SILKSCREEN image
• PIC-32MX European Declaration of Conformity

HARDWARE

• PIC-P32MX schematic
• PIC ICSP connector

SOFTWARE

• Button read demo code C source
• TIMER1 demo code C source
• TIMER1 + button + uart demo code C source
• TIMER1 + button demo code C source
• UART basic demo code C source
• UART with interrupts demo code C source