PIC-P14-20MHz

With this board you can develop and prototype with any of Microchip's 14 pin PIC microcontrollers. The RS232 driver on board allows an easy connection with a PC or other embedded hardware. The board has a User button and a status LED. The bridge rectifier allows this board to be powered with both AC and DC power supply adapters. PIC-P14 supports both 3V low power and normal 5V operation.

FEATURES

• ICSP/ICD connector for programming with PIC-PG1,PIC-PG2, PIC-PG3 or PIC-MCP and debugging with PIC-ICD1 (* for the PICs with ICD support)
• RS232 Tx, Rx interface with MAX232 IC on socket
• DIL14 microcontroller socket
• Quartz crystal 20Mhz
• LED to RC2 through jumper
• user Button
• Reset button
• Power plug-in jack
• selectable +3.3V / +5V power supply voltage regulator
• Extension slot on every uC pin
• Gird 100 mils
• GND bus
• Vcc bus
• Four mounting holes 3,3 mm (0,13")
• FR-4, 1.5 mm (0,062"), green soldermask, white silkscreen component print
• Dimensions 100x80 mm (3,9x3,15")

DOCUMENTS

• PIC-P14.pdf - Users manual
• PIC-P14-20MHz European Declaration of Conformity

HARDWARE

• PIC-P14 schematic
• PIC ICSP connector

SOFTWARE

• Blink LED for PIC16F688 demo code (C source and HEX)
• Button read for PIC16F688 demo code (C source and HEX)
• RS232 send / receive for PIC16F688 demo code (C source and HEX)