≡
PIC-P18-20MHz
DEvelopment prototype board for 18 pin PIC microcontrollers
Price | 4.95 EUR |
---|---|
10 - 49 pcs | 4.46 EUR |
50 - 10000 pcs | 3.96 EUR |
With this board you can develop and prototype with any of Microchip's 18 pin PIC microcontrollers. The RS232 driver on board allows an easy connection with a PC or other embedded hardware. The board has a User button and a status LED. The bridge rectifier allows this board to be powered with both AC and DC power supply adapters. PIC-P18 supports both 3V low power and normal 5V operation.
FEATURES
- ICSP/ICD connector for programming with PIC-MCP-USB and PIC-MCP or PIC-PG1,PIC-PG2, PIC-PG3, PIC-PG4 programmers and debugging with PIC-ICD2, PIC-ICD-POCKET, PIC-ICD2-TINY(* for the PICs with ICD support)
- RS232 Tx, Rx interface with MAX232 IC on socket
- DIL18 microcontroller socket
- Quartz crystal 20Mhz on socket
- LED to RB3 through jumper
- User button on RB2 port
- Reset button
- Power plug-in jack
- Selectable +3.3V / +5V power supply voltage regulator
- Extension slot on every uC pin
- Gird 100 mils
- GND bus
- Vcc bus
- Four mounting holes 3.3 mm (0.13")
- FR-4, 1.5 mm (0.062"), green soldermask, white silkscreen component print
- Dimensions: (100 x 80)mm ~ (3.9 x 3.15)"