PIC-P28-20MHz

With this board you can develop and prototype with all Microchip's SPDIP28 PIC microcontrollers. The RS232 driver on board allows for an easy connection with a PC or other embedded hardware. The board has an user button and a status LED. The bridge rectifier allows this board to be powered with both AC and DC power supply adapters. PIC-P28 supports both 3V low power and normal 5V operation.

FEATURES

• ICSP/ICD connector with 0.1'' step for programming or debugging
• RS232 Tx, Rx interface with MAX232 IC on socket
• Supports all 28-pin PIC microcontrollers in SPDIP package 300 mil
• Quartz crystall 20Mhz
• LED to RA0 through jumper
• User button on RA5 port
• Reset button
• Power plug-in jack
• Selectable +3.3V / +5V power supply voltage regulator
• Extension slot on every uC pin
• Grid with 100 mils step
• GND bus
• Vcc bus
• Four mounting holes 3,3 mm (0,13")
• FR-4, 1.5 mm (0,062"), red soldermask, white silkscreen component print
• Dimensions 100x80 mm (3,9x3,15")

DOCUMENTS

• PIC-P28.pdf - Users manual
• PIC-P28-20MHz European Declaration of Conformity
• PIC-P28-20MHz UKCA Declaration of Conformity

HARDWARE

• PIC-P28 schematic
• PIC ICSP connector

SOFTWARE

• Blink LED for PIC16F876 demo code (C source and HEX)
• Button read for PIC16F876 demo code (C source and HEX)
• RS232 read/write for PIC16F876 demo code (C source and HEX)