Print Page - How to use a 1-wire bus with the A20

Title: How to use a 1-wire bus with the A20
Post by: irenestroud on July 16, 2024, 10:24:44 AM

Hello,
I'm glad when joining this forum. I have a question.
How can I use a 1-wire bus with the A20 ?

Hope that someone can guide me how to connect this bus to the board.
Thanks in advance!

Title: Re: How to use a 1-wire bus with the A20
Post by: LubOlimex on July 16, 2024, 10:33:10 AM

This should be helpful, it quite a read and for A64 but it should be similar for the A20 board:

https://www.olimex.com/forum/index.php?topic=9266.0

Title: Re: How to use a 1-wire bus with the A20
Post by: irenestroud on July 21, 2024, 08:45:45 PM

QuoteThis should be helpful, it quite a read and for A64 but it should be similar for the A20 board:

https://www.olimex.com/forum/index.php?topic=9266.0

Thanks for your answer. This is helpful for me.

Olimex Support Forum

OLinuXino Android / Linux boards and System On Modules => A20 => Topic started by: irenestroud on July 16, 2024, 10:24:44 AM