Print Page - Connecting harness for one of the four small banks of pins on the iCE40HX8K-EVB

Title: Connecting harness for one of the four small banks of pins on the iCE40HX8K-EVB
Post by: Barbarossa on October 07, 2024, 05:48:00 PM

I just got a Lattice Semi iCE40HX8K-EVB.

I need a harness for the small bank of 40 pins. The ones that there are four of on the board.

I can't find it in any of the literature or on the website.

Thank you for your assistance.

Title: Re: Connecting harness for one of the four small banks of pins on the iCE40HX8K-EVB
Post by: LubOlimex on October 08, 2024, 08:15:08 AM

This cable maybe:

https://www.olimex.com/Products/Components/Cables/CABLE-40-40-10CM/

and this adapter to lead it to bigger 0.1" step maybe (for easier access via jumper wires). Just track pinout carefully and orientation of each wire.

https://www.olimex.com/Products/OLinuXino/A20/A20-OLinuXino-LIME2-UEXT/open-source-hardware

Title: Re: Connecting harness for one of the four small banks of pins on the iCE40HX8K-EVB
Post by: Barbarossa on October 08, 2024, 09:00:51 PM

Thank you very much! I believe those will work.

Olimex Support Forum

Others => FPGA => Topic started by: Barbarossa on October 07, 2024, 05:48:00 PM