Hello,
New user here !
I have just received a brand new Rev B board, here's what I've done:
- Connected it to a HDMI monitor
- Attached a Compaq QWERTY keyboard to the USB Host socket
- Set DIP switch 2,3,4 to OFF
- Attached USB C to powered USB Hub.
and here's what I hear and see:
- a few beeps on startup.
- The main menu displays with 1st choice PRODOS highlighted
What I do then:
- Typed the down arrow to navigate through the main menu
But to no joy ! I can't move the cursor on screen.
Questions :
- Did I miss some "Must read first" item ?
- Is it a known trap that all beginners fall into ?
Thank you in advance for your advices !
Jean-Pierre
[edited] PS: Using Right Arrow moves the cursor down ! So everything is in order.. sort of !
You also need a USB drive prepared with "Total Replay":
Refer to chapter default firmware on page 11 of the manual: "https://github.com/OLIMEX/Neo6502/blob/main/DOCUMENTS/Neo6502-user-manual.pdf"
Thank you very much !
I am familiar with this kind of operations on MCUs, it should not be very different to my experience !
JP