Olimex Support Forum

OLinuXino Android / Linux boards and System On Modules => STMP1 => Topic started by: wsheldon on April 03, 2025, 09:36:54 PM

Title: STMP157-OLinuXino-LIME2 not booting from eMMC without reset
Post by: wsheldon on April 03, 2025, 09:36:54 PM
Hello, I'm planning to use some STMP157-OLinuXino-LIME2-IND boards with Flash-e32Gs16M eMMC modules in an embedded application, but at least one board is having an issue with booting from eMMC automatically on power-up. So far all I've done with it is follow the guide for using the olinuxino-sd-to-emmc script, and it does boot successfully after manual reset, but it will not boot automatically like it did with the SD card. I've tried updating it and running the olinuxino-reset script since I did end up using another board to do the eMMC transfer, but neither has helped.

I am planning to add a custom front panel interface board that can handle power-on reset for my application, but I'm mostly wondering what might have happened during eMMC transfer to break automatic boot.
Title: Re: STMP157-OLinuXino-LIME2 not booting from eMMC without reset
Post by: LubOlimex on April 04, 2025, 08:19:44 AM
One board experiences this issue out of how many in total?

Can you try that one board with this image and report back if the issue persist:

https://ftp.olimex.com/TEMP/LIME2-NO-AXP209/