USB HID with MSP430-T5510

[rampadc]

Can I develop USB HID devices with the MSP430-T5510? I don't see it's listed as a feature.

[LubOlimex]

Hey rampadc,

You can develop USB HID devices with MSP430-T5510. There are also a number of official TI examples for MSP430F5510 that you might use.

Best regards,
Lub/OLIMEX

[rampadc]

You can develop USB HID devices with MSP430-T5510.

Thanks for the confirmation.

[rampadc]

Hi, I'm trying out the ADC USB example that is on the website. I'm using TI's MSP430 Launchpad as a programmer by connecting Vcc, Gnd, Test and Reset to the T5510's JTAG connector (I've got it to debug a blinking LED example yesterday).

While trying to download the program to the T5510, I ran into a wall of errors:

Code Select Expand

Thu Aug 01, 2013 23:46:06: Using license: Standalone license - IAR Embedded Workbench for Texas Instruments MSP430, 4K KickStart Edition 5.52
Thu Aug 01, 2013 23:46:07: Firmware version 30394216
Thu Aug 01, 2013 23:46:07: Interface dll version 2.4.9.1
Thu Aug 01, 2013 23:46:07: Device : MSP430F5510
Thu Aug 01, 2013 23:46:07: External voltage : 0.0 V
Thu Aug 01, 2013 23:46:07: VCC voltage : 3.5 V
Thu Aug 01, 2013 23:46:14: Verify error at address 0x9aa5 on target 0x0 in file 0x1
Thu Aug 01, 2013 23:46:14: Verify error at address 0x9aa4 on target 0x0 in file 0x10
Thu Aug 01, 2013 23:46:14: Verify error at address 0x9aa3 on target 0x0 in file 0x3b
Thu Aug 01, 2013 23:46:14: Verify error at address 0x9aa2 on target 0x0 in file 0xf9
Thu Aug 01, 2013 23:46:14: Verify error at address 0x9aa1 on target 0x0 in file 0x93
Thu Aug 01, 2013 23:46:14: Verify error at address 0x9aa0 on target 0x0 in file 0x1e
Thu Aug 01, 2013 23:46:14: Verify error at address 0x9a9f on target 0x0 in file 0x53
Thu Aug 01, 2013 23:46:14: Verify error at address 0x9a9e on target 0x0 in file 0x1e
Thu Aug 01, 2013 23:46:14: Verify error at address 0x9a9d on target 0x0 in file 0x24
Thu Aug 01, 2013 23:46:14: Verify error at address 0x9a9c on target 0x0 in file 0x6
Thu Aug 01, 2013 23:46:14: Verify error at address 0x9a9b on target 0x0 in file 0x42
Thu Aug 01, 2013 23:46:14: Verify error at address 0x9a9a on target 0x0 in file 0xff
Thu Aug 01, 2013 23:46:14: Verify error at address 0x9a99 on target 0x0 in file 0xa
Thu Aug 01, 2013 23:46:14: Verify error at address 0x9a98 on target 0x0 in file 0x5f
Thu Aug 01, 2013 23:46:14: Verify error at address 0x9a97 on target 0x0 in file 0x4e
Thu Aug 01, 2013 23:46:14: Verify error at address 0x9a96 on target 0x0 in file 0xf
Thu Aug 01, 2013 23:46:14: Verify error at address 0x9a95 on target 0x0 in file 0x3c
Thu Aug 01, 2013 23:46:14: Verify error at address 0x9a94 on target 0x0 in file 0x5
Thu Aug 01, 2013 23:46:14: Verify error at address 0x9a93 on target 0x0 in file 0x43
Thu Aug 01, 2013 23:46:14: Verify error at address 0x9a92 on target 0x0 in file 0xe
Thu Aug 01, 2013 23:46:14: Verify error at address 0x9a91 on target 0x0 in file 0x9e
Thu Aug 01, 2013 23:46:14: Verify error at address 0x9a90 on target 0x0 in file 0xea
Thu Aug 01, 2013 23:46:14: Verify error at address 0x9a8f on target 0x0 in file 0x13
Thu Aug 01, 2013 23:46:14: Verify error at address 0x9a8e on target 0x0 in file 0xb0
Thu Aug 01, 2013 23:46:14: Verify error at address 0x9a8d on target 0x0 in file 0x24
Thu Aug 01, 2013 23:46:14: Verify error at address 0x9a8c on target 0x0 in file 0x2
Thu Aug 01, 2013 23:46:14: Verify error at address 0x9a8b on target 0x0 in file 0x40
[... Deleted more of the same errors because the log exceeds 20000 characters limit ...]
Thu Aug 01, 2013 23:46:16: Failed to load debugee: D:\Workspaces\IAR\OLIMEXINO-5510\Debug\Exe\OLIMEXINO-5510.d43


What do they mean? Also, can you check the content of the LED demo? When extracted, it has pretty much the same files as the ADC demo.