Where are schematics / pinouts plus header info.

[Robert Leacroft]

Hi,

I must be getting old but I cannot find any links to the Lime schematic and pinsouts etc. The wiki page appears to have nothing in it. Up to now I have been experimenting with the A10S and you have lots of information about this but I am obviously going to have to change before going into production and some information would be useful.
Another post mentions the schematic so I guess it must exist.     Apologies if it is an obvious place and I am just missing it.

There was mention in an earlier post about adapters for the Lime headers. Was this just a reference to the socket to socket cable you already sell or is there perhaps going to be a pcb or cable to convert 1.5mm to 2.54 mm pins?

Robert

[Lurch]

check here: https://github.com/OLIMEX/OLINUXINO/tree/master/HARDWARE
some of the data is still missing, but then it's a 'developer' edition up to now.

[Robert Leacroft]

Thanks for that Lurch.  I can at least now marry the pcb pinouts to A10 data from the Cubieboard that I also already have.

Robert