Best MPIDE-bootloader for Duinomite-Mini

[mobluse]

I wonder which bootloader for MPIDE works best on DuinoMite-Mini:
There is one in the zip-file at https://www.olimex.com/wiki/MPIDE linked from "DUINOMITE-MEGA and MPIDE Library" called "MPIDE DuinoMite_Mega bootloader.hex".
There is another at https://github.com/chipKIT32/PIC32-avrdude-bootloader/tree/master/BootloadersCurrent-hex called "Olimex_Duinomite.hex".

I could probably borrow a PicKit3 to program it, but there seems to be an alternative since I also have an Arduino UNO: https://code.google.com/p/ardupic32/. I also have a Raspberry Pi 1 A and maybe this other project could be adapted to PIC32: http://holdenc.altervista.org/rpp/ , see also http://www.raspberrypi.org/forums/viewtopic.php?f=44&t=14689 .

[KeesZagers]

I used the one from the Olimex site (is it not the same as the Chipkit one?) and this works perfect. Bought also the PIC-KIT-3 and PIC-ICSP (don't forget, because you need the ICSP2 connector) for EUR. 33,-- together. Also this works perfect. I can choose either the original or the MPIDE bootloader. Reprogramming is done in seconds. Also flashing a special project is no problem. Anyway I think you should use the bootloader software from the hardware vendor (Olimex), it belongs to the hardware.

This brings me to the point of support of Olimex: If you specify your hardware to be available with either DMBasic or MPIDE, then you have two possibilities:

1. You deliver it with one bootloader, with which you can either flash DMBasic or MPIDE (problematic probably).
2. You deliver two versions of the hardware

One other question: I use the Duinomite MEGA, eMEGA and PIC-T795H. They have all support for both
environments, but I don't see MPIDE support for Duinomite and Duinomite Mini. Why not?