Can I connect MOD-RTL8188CU to the USB Port 0 (one used for OTG) in olixuino

[dmsherazi]

Can I connect RTL8188CU to the USB port 0  (the one used for OTG) of an A10. I would be connecting it on board UDP0 and UDM0 connecting to the module. Is this OK?

[dmsherazi]

OK Guys, I got the answer we need to modify fex file to make USB OTG as a USB HOST.

Locate the USB 0 section of fex file and change the usb_type to 1.