Wiki AM335x ; Debian not start & continuous integration

[adjivas]

Hi,

With a continuous integration, I applied all the wiki of AM335x (https://www.olimex.com/wiki/AM335x) for the AM3352-SOM-EVB https://www.olimex.com/Products/SOM/AM335X/AM3352-SOM-EVB/open-source-hardware product.
The whole procedure is followed as:

• manifest - https://github.com/adjivas/electronic-levelup/blob/olimex/.travis.yml
• trace - https://travis-ci.org/adjivas/electronic-levelup/builds/398724732
• repository - https://github.com/adjivas/electronic-levelup/tree/olimex

These files are produced by the steps described above:

• MLO - https://github.com/adjivas/electronic-levelup/raw/olimex/images/MLO
• u-boot.img - https://github.com/adjivas/electronic-levelup/blob/olimex/images/u-boot.img
• am335x-olimex-som-evb-nand.dtb - https://github.com/adjivas/electronic-levelup/blob/olimex/boot/dts/am335x-olimex-som-evb-nand.dtb
• am335x-olimex-som-evb.dtb - https://github.com/adjivas/electronic-levelup/blob/olimex/boot/dts/am335x-olimex-som-evb.dtb
• am335x-olimex-som-nand.dtb - https://github.com/adjivas/electronic-levelup/blob/olimex/boot/dts/am335x-olimex-som-nand.dtb
• am335x-olimex-som.dtb - https://github.com/adjivas/electronic-levelup/blob/olimex/boot/dts/am335x-olimex-som.dtb
• zImage - https://github.com/adjivas/electronic-levelup/blob/olimex/boot/zImage
• file system (splitted into three part of 100M from same archive) - https://github.com/adjivas/electronic-levelup/tree/olimex/fs

So, the bootscript uEnv.txt is configured like:

Code Select Expand


fdtfile=am335x-olimex-som-evb.dtb
optargs=loglevel=0 mtdoops.mtddev=omap2.nand

According to the Olimex's wiki, all these are written in the MMC card as I described in my README.md https://github.com/adjivas/electronic-levelup/blob/olimex/README.md.

But, when I plug my SD card and start the AM3352-SOM-EVB, the Debian system seems not start (the display doesn't respond and the green LED1 blinks as an heartbeat).

Is there something wrong in my implementation of Olimex's Wiki (https://github.com/adjivas/electronic-levelup/blob/olimex/.travis.yml)?
Is it possible to get any kernel trace with UART or other protocol, to debug it?