L9260 board with Windows CE 5.0

[bsunar]

I cannot boot the 9260 board with Windows CE 5.0 demo BSP specifically designed for Atmel's EK board. The Samba installation steps work fine. All the binaries installed properly below;

BOOTRAM_SPI_CS1.nb0
EBOOT.nb0
NK.nb0

NANDflash adresses;

Physical Start Address : (0x80059000) : 0x80067000(Press Return)
Starting ip : (0x8005a000) : 0x80068000(Press Return) 
Total ROM size : (0x75144c) : 0x007a8854 (Press Return)


When booting, It looks for Ethernet interface and fails and sets forever spining. I attached the terminal traces below;

I have to switch to Win CE but there is not much information available for the Olimex9260 package. I would greatly appreciate your directions.

Thank you!


>
INFO : Low Level Init : OK
Starting eboot ...
ÕMÉ¥ter Clock is 50003830 Hz
ѡɹѥ  ½½Ñ±½Ñ]¥¹½ÝɽͽÑ]¥¹½ÝÍ
ÉŹݽÉÅáÉÁÁÙ¥5)ÙÁ-½ ÅáÉÁÁÙÅÅéÅåéÅå5)5
ÁÑ­¥ÍÕÁÁÁÍáÍÁ!é5)Õ5)5
ѽɹÁɽɵå9=¡
±
Í¡éQÑÕ  ÅÙÅ)5J

ÍéÑÁåÙ)5A
M¥ééÕÉáåÑÍ)5M¥ééÉÅÙÉÙááåÑÍ)51½
                              Press [ENTER] to download now or [SPACE] to cancel.

Initiating image download in 0 seconds. System ready!
Preparing for download...
memset 80059000 len=75144cINFO: Trying to initialize the internal NIC (EMACB)...
pEmac->EMAC_SA1L=  5040302
pEmac->EMAC_SA1H= 706
Init Emac Ethernet controler
Enter in AT91F_EmacEntry  base = 0xbffc4000
EMACB revision 0x1010c
at91_macb_alloc_sdram 80043340<-at91_macb_alloc_sdram at91_macb_init_dma 80043340at91_macb_init_dma a0059780at91_macb_init_dma a0059780<-at91_macb_init_dma Enter in AT91F_EMACInit
PHY ID : -1PHY ID : 2233881PHY ID : -1PHY ID : -1PHY ID : -1PHY ID : -1PHY ID : -1PHY ID : -1PHY ID : -1PHY ID : -1PHY ID : -1PHY ID : -1PHY ID : -1PHY ID : -1PHY ID : -1PHY ID : -1No Phy Found
ERROR: Failed to initialize EMACB Ethernet controller.
WARNING : No Ethernet link detected... Check the connection !               Retrying in 6 seconds. (press <SPACE> or <ENTER> to cancel)
INFO: Trying to initialize the internal NIC (EMACB)...
pEmac->EMAC_SA1L=  5040302
pEmac->EMAC_SA1H= 706
Init Emac Ethernet controler
Enter in AT91F_EmacEntry  base = 0xbffc4000
EMACB revision 0x1010c
at91_macb_alloc_sdram 80043340<-at91_macb_alloc_sdram at91_macb_init_dma 80043340at91_macb_init_dma a0059780at91_macb_init_dma a0059780<-at91_macb_init_dma Enter in AT91F_EMACInit
PHY ID : -1PHY ID : 2233881PHY ID : -1PHY ID : -1PHY ID : -1PHY ID : -1PHY ID : -1PHY ID : -1PHY ID : -1PHY ID : -1PHY ID : -1PHY ID : -1PHY ID : -1PHY ID : -1PHY ID : -1PHY ID : -1No Phy Found
ERROR: Failed to initialize EMACB Ethernet controller.
WARNING : No Ethernet link detected... Check the connection !
Retrying in 10 seconds. (press <SPACE> or <ENTER> to cancel)
INFO: Trying to initialize the internal NIC (EMACB)...
pEmac->EMAC_SA1L=  5040302
pEmac->EMAC_SA1H= 706
Init Emac Ethernet controler
Enter in AT91F_EmacEntry  base = 0xbffc4000
EMACB revision 0x1010c
at91_macb_alloc_sdram 80043340<-at91_macb_alloc_sdram at91_macb_init_dma 80043340at91_macb_init_dma a0059780at91_macb_init_dma a0059780<-at91_macb_init_dma Enter in AT91F_EMACInit
PHY ID : -1PHY ID : 2233881PHY ID : -1PHY ID : -1PHY ID : -1PHY ID : -1PHY ID : -1PHY ID : -1PHY ID : -1PHY ID : -1PHY ID : -1PHY ID : -1PHY ID : -1PHY ID : -1PHY ID : -1PHY ID : -1No Phy Found
ERROR: Failed to initialize EMACB Ethernet controller.
WARNING : No Ethernet link detected... Check the connection !         Retrying in 0 seconds. (press <SPACE> or <ENTER> to cancel)
INFO: Trying to initialize the internal NIC (EMACB)...
pEmac->EMAC_SA1L=  5040302
pEmac->EMAC_SA1H= 706
Init Emac Ethernet controler
Enter in AT91F_EmacEntry  base = 0xbffc4000
EMACB revision 0x1010c
at91_macb_alloc_sdram 80043340<-at91_macb_alloc_sdram at91_macb_init_dma 80043340at91_macb_init_dma a0059780at91_macb_init_dma a0059780<-at91_macb_init_dma Enter in AT91F_EMACInit
PHY ID : -1PHY ID : 2233881PHY ID : -1PHY ID : -1PHY ID : -1PHY ID : -1PHY ID : -1PHY ID : -1PHY ID : -1PHY ID : -1PHY ID : -1PHY ID : -1PHY ID : -1PHY ID : -1PHY ID : -1PHY ID : -1No Phy Found
ERROR: Failed to initialize EMACB Ethernet controller.
WARNING : No Ethernet link detected... Check the connection !         Retrying in 0 seconds. (press <SPACE> or <ENTER> to cancel)
INFO: Trying to initialize the internal NIC (EMACB)...
pEmac->EMAC_SA1L=  5040302
pEmac->EMAC_SA1H= 706
Init Emac Ethernet controler
Enter in AT91F_EmacEntry  base = 0xbffc4000
EMACB revision 0x1010c
at91_macb_alloc_sdram 80043340<-at91_macb_alloc_sdram at91_macb_init_dma 80043340at91_macb_init_dma a0059780at91_macb_init_dma a0059780<-at91_macb_init_dma Enter in AT91F_EMACInit
PHY ID : -1PHY ID : 2233881PHY ID : -1PHY ID : -1PHY ID : -1PHY ID : -1PHY ID : -1PHY ID : -1PHY ID : -1PHY ID : -1PHY ID : -1PHY ID : -1PHY ID : -1PHY ID : -1PHY ID : -1PHY ID : -1No Phy Found
ERROR: Failed to initialize EMACB Ethernet controller.
ERROR : No Ethernet Detected. Aborting!
SpinForever...