STM32-E_revB1_demo.zip for Eclipse ?

[anotherbrick]

STM32-E_revB1_demo.zip

I have downloaded this demo however in readme.txt it says

In order to work you must program with J-Link 7.0 and IAR for ARM 6.30 or newer

1) is there an Eclipse version of this demo ?
how can I compile this demo in Eclipse ?

2) there is an RX TX pin avaliable on STM32-E407 board
are these pins RS232 signal levels or do I have to add MAX232 chip ?

[LubOlimex]

There is a blink demo in the OpenOCD package: https://www.olimex.com/Products/ARM/JTAG/_resources/OpenOCD/.

Regards,
Lub/OLIMEX

[anotherbrick]

Hello LubOlimex ,

first of all thank you for the answer

I have run blink-led demo already , I compiled and downloaded into E407 and run , this is OK

but...,

I bought this board for the ethernet functionality

I need a simple ECLIPSE demo for using ethernet functions

the STM32-E_revB1_demo.zip in STM32-E407 webpage - README says it is for IAR - I have no IAR , I have downloaded Olimex Eclipse

regards

[LubOlimex]

Hey anotherbrick,

You can download and use an evaluation version of IAR EW for ARM for 30 days. It requires only registration at their web site. Having a look at the code in IAR I believe will help you a lot, and you can then adjust it for the Eclipse.

A good idea is to look at the original libraries released by STMicroelectronics in the official STM32Fxx web pages.

Best regards,
Lub/OLIMEX

[chelox]

Hello!!

Anyone have a simple example (like blink led) in Eclipse for Olimex board STM32-E407.

thank you!

[anotherbrick]

hello chelox,

if you download OLIMEX-ODS ( eclipse + yagarto )

there is an blink led demo for the E407 board

[chelox]

thank you very much!