A13-OLinuXino-WIFI LCD issue

[mr.k]

I just got my A13-OLinuXino-WIFI and I've attempted to put the LCD version of Android on the NAND. It seemed to work (following the plug/unplug instructions for LiveSuit) and the LCD panel just shows white with some light rainbow lines vertically across it after starting.

Did the android image actually get transferred to the NAND? The progress bar in LiveSuit showed that it did. I can still boot android on the board, which works via VGA (I'm not using VGA and the LCD at the same time). I'm using a 9v, 500mA power supply.

Any help would be appreciated! Thanks!

[cypher]

Hi mr.k,

there is a special nand image of Android for the board with LCD.

Check this link:

https://www.olimex.com/wiki/A13-OLinuXino

In the FAQ of the display you can read the following statement:

he default A13-OLinuXino image is set for a VGA display and resolution. To use LCD with A13-OLinuXino you need to upload new image with the appropriate settings. The download links for the images may be found in the wiki article for A13-OLinuXino

So flash the iamge and it should work https://docs.google.com/open?id=0B-bAEPML8fwleXBMellGdWJ3RUk


Marc

[mr.k]

Is there any way to check if the image on the NAND is the correct one?