device tree

[hamdi]

Is there any link so I can find am335x-olimex-lcd_* device tree sources

[JohnS]

Supposed to be in such as am335x-olimex-som.dtb -- are they not there?

John

[hamdi]

I cannot find them any where

[bruceuk]

Could it be these?

$ more ./olimex-github/linux-3.12.10-ti2013.12.01-am3352_som/arch/arm/boot/dts/am335x-olimex-som.dts

/*
* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/dts-v1/;

#include "am33xx.dtsi"
#include "am335x-bone-common.dtsi"

&ldo3_reg {
   regulator-min-microvolt = <1800000>;
   regulator-max-microvolt = <1800000>;
   regulator-always-on;
};

&mmc1 {
   vmmc-supply = <&vmmcsd_fixed>;
};

&am33xx_pinmux {
   lcd_pins_default: lcd_pins_default {
      pinctrl-single,pins = <
      0x20 0x01 /* gpmc_ad8.lcd_data16, OUTPUT | MODE1 */
      0x24 0x01 /* gpmc_ad9.lcd_data17, OUTPUT | MODE1 */
      0x28 0x01 /* gpmc_ad10.lcd_data18, OUTPUT | MODE1 */
      0x2c 0x01 /* gpmc_ad11.lcd_data19, OUTPUT | MODE1 */
      0x30 0x01 /* gpmc_ad12.lcd_data20, OUTPUT | MODE1 */
      0x34 0x01 /* gpmc_ad13.lcd_data21, OUTPUT | MODE1 */
      0x38 0x01 /* gpmc_ad14.lcd_data22, OUTPUT | MODE1 */
      0x3c 0x01 /* gpmc_ad15.lcd_data23, OUTPUT | MODE1 */
      0xa0 0x00 /* lcd_data0.lcd_data0, OUTPUT | MODE0 */
      0xa4 0x00 /* lcd_data1.lcd_data1, OUTPUT | MODE0 */
      0xa8 0x00 /* lcd_data2.lcd_data2, OUTPUT | MODE0 */
      0xac 0x00 /* lcd_data3.lcd_data3, OUTPUT | MODE0 */
      0xb0 0x00 /* lcd_data4.lcd_data4, OUTPUT | MODE0 */
      0xb4 0x00 /* lcd_data5.lcd_data5, OUTPUT | MODE0 */
      0xb8 0x00 /* lcd_data6.lcd_data6, OUTPUT | MODE0 */
      0xbc 0x00 /* lcd_data7.lcd_data7, OUTPUT | MODE0 */
      0xc0 0x00 /* lcd_data8.lcd_data8, OUTPUT | MODE0 */
      0xc4 0x00 /* lcd_data9.lcd_data9, OUTPUT | MODE0 */
      0xc8 0x00 /* lcd_data10.lcd_data10, OUTPUT | MODE0 */
      0xcc 0x00 /* lcd_data11.lcd_data11, OUTPUT | MODE0 */
      0xd0 0x00 /* lcd_data12.lcd_data12, OUTPUT | MODE0 */
      0xd4 0x00 /* lcd_data13.lcd_data13, OUTPUT | MODE0 */
      0xd8 0x00 /* lcd_data14.lcd_data14, OUTPUT | MODE0 */
      0xdc 0x00 /* lcd_data15.lcd_data15, OUTPUT | MODE0 */
      0xe0 0x00 /* lcd_vsync.lcd_vsync, OUTPUT | MODE0 */
      0xe4 0x00 /* lcd_hsync.lcd_hsync, OUTPUT | MODE0 */
      0xe8 0x00 /* lcd_pclk.lcd_pclk, OUTPUT | MODE0 */
      0xec 0x00 /* lcd_ac_bias_en.lcd_ac_bias_en, OUTPUT | MODE0 */
      >;
   };

   lcd_pins_sleep: lcd_pins_sleep {
      pinctrl-single,pins = <
      0x20 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad8.lcd_data16 */
      0x24 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad9.lcd_data17 */
      0x28 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad10.lcd_data18 */
      0x2c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad11.lcd_data19 */
      0x30 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad12.lcd_data20 */
      0x34 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad13.lcd_data21 */
      0x38 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad14.lcd_data22 */
      0x3c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad15.lcd_data23 */
      0xa0 (PULL_DISABLE | MUX_MODE7) /* lcd_data0.lcd_data0 */
      0xa4 (PULL_DISABLE | MUX_MODE7) /* lcd_data1.lcd_data1 */
      0xa8 (PULL_DISABLE | MUX_MODE7) /* lcd_data2.lcd_data2 */
      0xac (PULL_DISABLE | MUX_MODE7) /* lcd_data3.lcd_data3 */
      0xb0 (PULL_DISABLE | MUX_MODE7) /* lcd_data4.lcd_data4 */
      0xb4 (PULL_DISABLE | MUX_MODE7) /* lcd_data5.lcd_data5 */
      0xb8 (PULL_DISABLE | MUX_MODE7) /* lcd_data6.lcd_data6 */
      0xbc (PULL_DISABLE | MUX_MODE7) /* lcd_data7.lcd_data7 */
      0xc0 (PULL_DISABLE | MUX_MODE7) /* lcd_data8.lcd_data8 */
      0xc4 (PULL_DISABLE | MUX_MODE7) /* lcd_data9.lcd_data9 */
      0xc8 (PULL_DISABLE | MUX_MODE7) /* lcd_data10.lcd_data10 */
      0xcc (PULL_DISABLE | MUX_MODE7) /* lcd_data11.lcd_data11 */
      0xd0 (PULL_DISABLE | MUX_MODE7) /* lcd_data12.lcd_data12 */
      0xd4 (PULL_DISABLE | MUX_MODE7) /* lcd_data13.lcd_data13 */
      0xd8 (PULL_DISABLE | MUX_MODE7) /* lcd_data14.lcd_data14 */
      0xdc (PULL_DISABLE | MUX_MODE7) /* lcd_data15.lcd_data15 */
      0xe0 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_vsync.lcd_vsync, OUTPUT | MODE0 */
      0xe4 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_hsync.lcd_hsync */
      0xe8 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_pclk.lcd_pclk */
      0xec (PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_ac_bias_en.lcd_ac_bias_en */
      >;
   };

};

&lcdc {
   pinctrl-names = "default", "sleep";
   pinctrl-0 = <&lcd_pins_default>;
   pinctrl-1 = <&lcd_pins_sleep>;
   status = "okay";
   /*        display-timings {
    480x272 {
    hactive         = <480>;
    vactive         = <272>;
    hback-porch     = <43>;
    hfront-porch    = <8>;
    hsync-len       = <4>;
    vback-porch     = <12>;
    vfront-porch    = <4>;
    vsync-len       = <10>;
    clock-frequency = <9000000>;
    hsync-active    = <0>;
    vsync-active    = <0>;
    };
    };*/

   display-timings {
      native-mode = <&vga1024x768>;
      lcd4: 480x272 {
         clock-frequency = <9000000>;
         hactive = <480>;
         vactive = <272>;
         hfront-porch = <3>;
         hback-porch = <40>;
         vback-porch = <8>;
         vfront-porch = <7>;
         hsync-len = <2>;
         vsync-len = <1>;
         hsync-active = <0>;
         vsync-active = <0>;
      };
      lcd7: 800x480 {
         clock-frequency = <33300000>;
         hactive = <800>;
         vactive = <480>;
         hfront-porch = <210>;
         hback-porch = <40>;
         vback-porch = <23>;
         vfront-porch = <20>;
         hsync-len = <6>;
         vsync-len = <2>;
         hsync-active = <0>;
         vsync-active = <0>;
      };
      lcd10: 1024x600 {
         clock-frequency = <51200000>;
         hactive = <1024>;
         vactive = <600>;
         hfront-porch = <160>;
         hback-porch = <140>;
         vback-porch = <20>;
         vfront-porch = <12>;
         hsync-len = <20>;
         vsync-len = <3>;
         hsync-active = <0>;
         vsync-active = <0>;
      };

      vga800x600: 800x600 {
         clock-frequency = <40000000>;
         hactive = <800>;
         vactive = <600>;
         hfront-porch = <40>;
         hback-porch = <88>;
         vfront-porch = <1>;
         vback-porch = <23>;
         hsync-len = <128>;            
         vsync-len = <4>;
         hsync-active = <0>;
         vsync-active = <0>;
      };
      vga1024x768: 1024x768 {
         clock-frequency = <65000000>;
         hactive = <1024>;
         hfront-porch = <24>;
         hback-porch = <160>;
         hsync-len = <136>;
         vactive = <768>;
         vfront-porch = <3>;
         vback-porch = <29>;
         vsync-len = <6>;
         hsync-active = <0>;
         vsync-active = <0>;
      };
   };
};

[hamdi]

that is default device tree which load vga "cape" , I think      native-mode = <&vga1024x768>;
is the line which I should change to have my 4.3" lcd working .