Compatible? : Energia with XDS100-V2 + ti TMS320F2806M

[zeptomoon]

Hi All!

I'm successfully using Energia.nu v17 [1] with the C2000 LaunchPadXL TMS320F28069M.[2]
This makes getting started with that MCU really easy!! 

That LaunchPadXL has the following on board:

• A Texas Instruments TMS320F28069M micro-controller
• XDS100v2 debug probe (with USB connector)

Now, since Energia is working fine with the LaunchPadXL, can I safely assume also
that Energia will work with the following setup?

• A TMS320F28069M dev-board with JTAG. [3]
• The OLIMEX XDS100-V2
  

Can anyone confirm this? 
Thanks a lot!! 

[1] http://energia.nu/pinmaps/launchxl-f28027f/
[2] http://www.ti.com/tool/LAUNCHXL-F28069M
[3] https://github.com/SDI-SoftwareDefinedInverter/TAPAS/blob/master/TAPAS V1.0 - Schematic.pdf

PS: The TMS320F28069M dev-board ("TAPAS") works fine with ti CodeComposerStudio using the OLIMEX XDS100-V3, but Energia probably expects a V2 debug probe, so it fails when I try to flash the TAPAS dev-board with the XDS100-V3.

[zeptomoon]

For anyone having a similar problem:
CONFIRM!   

Okay, I risked it and bought the OLIMEX XDS100-V2 and just tested it.
The USB JTAG probe uploaded the "Blink" sketch successfully!
From that, I assume that any Energia.nu sketch can be uploaded with that device to the TAPAS or similar boards.



image link