How to connect iMX53 qsb with ARM-USB-OCD-H via openOCD?

[Zhenyu Ning]

Hi,

I am trying to connect my Windows PC with iMX53 qsb via ARM-USB-OCD-H and openOCD. I am following the manual https://www.olimex.com/Products/ARM/JTAG/_resources/ARM-USB-OCD_and_OCD_H_manual.pdf exactly, downloading the executable for windows, using Zadig for the drivers.

After that, i try to connect to the board using,
openocd.exe -f interface/ftdi/olimex-arm-usb-ocd-h.cfg -f board/imx53loco.cfg

However, the openOCD just stop there with logs like,

Open On-Chip Debugger 0.9.0-rc1 (2015-04-24-22:05)
Licensed under GNU GPL v2
For bug reports, read
        http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "jtag". To override use 'transport select <transport>'.
Warn : imx53.SDMA: nonstandard IR value
iMX53 Loco board lodaded.
adapter speed: 3000 kHz
RCLK - adaptive
DCD
Info : RCLK (adaptive clock speed)

I don't know what happens, it seems that i just failed to connect to the board. Is there anyone kindly know what's going on?

Appreciate for any discussion and help!

Best Regards,
Zhenyu

[JohnS]

Best thing is to get a -d3 log and then report to oocd mailing list.  They're usually very helpful.

John

[Zhenyu Ning]

Best thing is to get a -d3 log and then report to oocd mailing list.  They're usually very helpful.

John

Thanks for your advise, John. I will send my issue with d3 log to the mailing list.

Best,
Zhenyu