How to connect OLIMEXINO-328 with MOD-WIFI-ESP8266???

[teiath]

Hello i am a newbie and i am making an android application.I need to connect arduino with wifi but i dont know how to do that....any tips???

Thanks for your time!

[ignat99]

Code Select Expand

//#include <SoftwareSerial.h>

// if you want to skip the messages on the serial monitor comment the macro below
//#define  _DEBUG_MESSAGE   

//#define  BUTTON_PRESSED  (!(PINE & 0x04))
#define  LED_OFF     0
#define  LED_ON      1
#define  LED_TOGGLE  2

//#define RXPIN 0
//#define TXPIN 1

//SoftwareSerial Serial1(RXPIN,TXPIN);

void Connect_to_WiFi_Network (char Net[], char Pass[])
{
  String Command;
  Command = "AT+CWJAP=\"";
  Command = Command + Net;
  Command = Command + "\",\"";
  Command = Command + Pass;
  Command = Command + "\"\r";
  Serial.print (Command); //1
}

void Disconnect_from_WiFi_Network (void)
{
  Serial.print ("AT+CWQAP\r"); //1
}

// using PIC-WEB as a server
// the default server IP address is 192.168.0.130
// if you want to change it edit the macro below
#define  IP_Server  "192.168.0.130"
void Get_Server_Page ()
{
  String Cmd, IP;
  long int Timeout = 10000000;
//  Serial1.print("AT+CIPMUX=0\r");
  IP = "AT+CIPSTART=\"TCP\",\"";
  IP += IP_Server;
  IP += "\",8080"; //8080
//  IP = "AT+CIPSTART=\"UDP\",\"";
//  IP += IP_Server;
//  IP += "\",80,10000,2"; //8080

  Serial.println (IP);
#ifdef  _DEBUG_MESSAGE
//  Serial1.println (IP);  // debug purpose
#endif
if (Serial.find ("Error"))
   return;

delay(20000);
  // by default index.htm (/<empty>) otherwise should be the subpage name
  // for example ("GET /forms.htm HTTP/1.0\r\n\r\n"
  Cmd = "GET /forms.htm&field1=1&field2=3&field3=3 HTTP/1.0\r\n\r\n";

Serial.print("AT+CIPSEND="); //1
Serial.println (Cmd.length()); //1
// delay(10000);
if (Serial.find (">"))
  {
    Serial.print(Cmd); //1
#ifdef  _DEBUG_MESSAGE
//    Serial1.print ('>');
#endif
//    delay(1000);
  }
else
  {
//    Serial1.println ("AT+CIPCLOSE"); //1
#ifdef  _DEBUG_MESSAGE
//    Serial1.println ("Connection Timeout!");
#endif
    delay (1000);
    return;
  }


 
  // original but delay is too long and during that time the data
  // sent by the server to the ESP module are lost;
  // replaced by timeout instead with value 100K
  // updated after each character
// delay (2000);

  while (Timeout--)
  {
    static bool FirstTime=true;
    int Number=0, i=0;

    // filtering metadata so only page data will be printed
    if (FirstTime)
      FirstTime=false;
    else
      Serial.find ("OK"); //1

   Serial.find ("+IPD,"); //1
    delay (1);


    while (1)
    {
      char c=0; //1
      if (Serial.available())
      {
        c = Serial.read (); //1
        if (c == ':')
          break;
        else
          Number = Number * 10 + (c & 0x0F);
      }
      else
      {
        Timeout--;
        if (!Timeout)
          break;
      }
    }
   
   
   
    for (i=0; i<Number;)
      if (Serial.available ())
      {
//#ifdef  _DEBUG_MESSAGE
//        Serial1.print ((char)Serial.read ()); //1
//#endif       
        Timeout = 100000;
        i++;
      }
  } //while(Timeout)
#ifdef  _DEBUG_MESSAGE
//  Serial1.println ("Transfer complete!");
#endif 
}

void setup()
{
  // LEDs on Olimexino set as outputs
  //pinMode (7, OUTPUT);
  //digitalWrite (7, LOW);
  pinMode (9, OUTPUT);
  digitalWrite (9, LOW);
 
//  pinMode(TXPIN,OUTPUT);
//  pinMode(RXPIN,INPUT);

// DDRE = DDRE & (~(1<<2));  // Button - input

// pinMode (8, OUTPUT);    // UEXT Power
// digitalWrite (8, LOW);  // UEXT Power turned on

#ifdef  _DEBUG_MESSAGE
//  Serial1.begin (115200);
#endif
  Serial.begin (115200); //1

  delay (1000);
  Serial.print ("AT+CWMODE=3\r"); //1
  delay (1000);
  Serial.print ("AT+RST\r"); //1

  Disconnect_from_WiFi_Network ();
  //delay(1000);
  Connect_to_WiFi_Network ("Net", "password");
  //delay(1000);
}

bool Button = true;  // this variable is used to avoid command repetition due to holding the button
int Val=0;

void loop ()
{
//  if (BUTTON_PRESSED && Button)
//  {
    // toggling LEDs on the Olimexino board indicates that button is pressed
//    digitalWrite (7, Val);
    digitalWrite (9, !Val);
    Val = !Val;

    // sending command to the server
    //delay (10000);
    //Serial1.print ("AT+RST\r\n"); //1
    //Disconnect_from_WiFi_Network ();
    //delay(1000);
    //Connect_to_WiFi_Network ("Net", "password");
    //delay(10000);
    Get_Server_Page ();
//  Button = false;  // mark button as pressed
// }

//  if (!BUTTON_PRESSED)
//    Button = true;  // mark button as released
}