OLIMEX 328 + Dragino Shield

[bmidy]

Hi,

I have a OLIMEX328, and I d like to use this one with "Yun Dragino Shield"

http://www.dragino.com/products/yunshield/item/86-yun-shield.html

Could you say me if it is ok ? could I plug in this shield withou risk ?
I also remark that the "Yun Dragino  shield" has morte pin as the OLIMEX-328  spin header?



And I d like also to use 2 shield together with my Olimex-328 :
- EKG Shield (https://www.olimex.com/Products/Duino/Shields/SHIELD-EKG-EMG/)
- Yun Dragino

How to proceed ? first Yun Dragino, and then above EKG shield



Thanks

[LubOlimex]

The Dragino shield would not fit OLIMEXINO-328 out-of-the-box. The Dragino shield that you linked seems to use the SPI of an additional connector (under the ICSP pins). OLIMEXINO-328 has no provision for it - the ICSP pins of OLIMEXINO-328 are not under that connector. You would probably have to use wires for this SPI connection.

Best regards,
Lub/OLIMEX