EKG-Shield Programme Code

[bobbel]

One should download a library named TimerOne.h and should depose this library in the library folder of the sketckbook. But when looking through the software code of the downloaded EKG shield file, I can not see that his libray TimeOne.h is included in the .ino file. But I read the following comment:

Code Select Expand

// Timer2
// Timer2 is used to setup the analag channels sampling frequency and packet update.
// Whenever interrupt occures, the current read packet is sent to the PC
// In addition the CAL_SIG is generated as well, so Timer1 is not required in this case!
Is the TimerOne.h library not required?

[LubOlimex]

Is this for the Arduno IDE example? Only FlexiTimer2 seems to be included and required.

[bobbel]

This is the example from the IDE.

[LubOlimex]

Did you install our Arduino package? To be able to select the example for SHIELD-EKG-EMG you might need to select temporarily one of our board OLIMEXINO-328 or OLIMEXINO-32u4.

Check this guide: https://www.olimex.com/Products/Duino/_resources/Arduino_instructions.pdf