Arduinio + MOD-LED8x8

[jimutraa]

Hello,
I recently came into possession of a MOD-LED8x8 unit, although its a Launchpad booster product, I've been on the look out for good quality reasonably priced LED matrix for 'Duino projects so purchased some samples in ebay.
Whilst I see the sample code for Launchpad and schematic, I have some question about how and if it can be adapted for other MCU boards. For instance Arduino - Does anyone have any example used with Arduino code?
Can get it to light up and display pattern with typical LED matrix examples, but not yet accurately.
I see that its using three x  74xx595 shift register, for a 24 pin LED matrix (which also unusual for a red 8x8 - usually 16 pin?) but not sure the layout of the LED matrix also - which would help.
Please anyone can help or suggest example?  Think it would be a good addition to 'Duino community projects.
Would make a tutorial about it, if I can get it confirmed.
To Olimex designers, thanks again for a great product hope you can understand the idea to use more widely. 

best regards,  Jim

[olimex]

this is MOD-LED8x8 web page https://www.olimex.com/Products/MSP430/Booster/MOD-LED8x8/
and this is schematic https://www.olimex.com/Products/MSP430/Booster/MOD-LED8x8/resources/MOD-LED8x8-SCHEMATIC-REV-D.pdf
there are two 74HC595 only + ULN2007