Can't boot from SD card

Started by chjohn, October 23, 2019, 04:07:58 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

chjohn

October 23, 2019, 04:07:58 PM
I write my question in suppot@olimex.com but while they not answered, I decided to duplicate question in this forum.

message:
---------------------------------

Hi. I own A13-OLinuXino Rev.C (Made in Bulgaria 2012) with WiFi and Hynix RAM chip and LCD screen.

Default board load from NAND Arduino and work very well.

I try load from SD card use Linux OS, but I can't do this.

I use different images OS (from https://www.olimex.com/wiki/A13-OLinuXino and other place).

In UART1 shows following logs:

Code Select
U-Boot SPL 2013.07-rc1 (Jun 20 2013 - 23:55:50)
Board: A13_MID
DRAM: 512MB
CPU: 1008000000Hz, AXI/AHB/APB: 3/2/2
SUNXI SD/MMC: 0
spl: mmc blk read err - 0
### ERROR ### Please RESET the board ###

For writing img to SD card I use Win32DiskImager-1.0 (Verify process succeeds)

I use difference DC source like 12V adapter (2.5A), USB, LiPO (direct to connector on board).

I use diffrence SD card (Kingston 16 GB microSDHC U1 and Smartbuy 32 Gb microSDHC U1).

And every time the same result.

I try write image direct to NAND, using LiveSuite, but program show "Image file invalid".

What can (necessary) be checked for successful boot loading from SD card ?

Best regards, John Ch.

---------------------------------

I also found that even an empty (fast format to FAT) SD card produces the same result when bord boot:
spl: mmc blk read err - 0

also I can't mount SD card in Arduino
UART1 show:

Code Select
[  112.070000] [mmc]: sdxc_request_done(L1114): smc 0 err, cmd 18,  RTO !!
[  112.080000] [mmc]: sdxc_request_done(L1118): In data read operation
[  112.080000] [mmc]: found data error, need to send stop command !!
[  112.090000] [mmc]: sdxc_send_manual_stop(L892): sdc 0 send stop command failed
[  112.100000] mmcblk0: unknown error 110 sending read/write command, card status 0x900
[  112.100000] end_request: I/O error, dev mmcblk0, sector 0
[  112.100000] Buffer I/O error on device mmcblk0, logical block 0
[  112.100000] end_request: I/O error, dev mmcblk0, sector 8
[  112.100000] Buffer I/O error on device mmcblk0, logical block 1
[  112.100000] end_request: I/O error, dev mmcblk0, sector 16
[  112.100000] Buffer I/O error on device mmcblk0, logical block 2
[  112.100000] end_request: I/O error, dev mmcblk0, sector 24
[  112.100000] Buffer I/O error on device mmcblk0, logical block 3
[  112.150000] [mmc]: sdxc_request_done(L1114): smc 0 err, cmd 18,  RTO !!
[  112.160000] [mmc]: sdxc_request_done(L1118): In data read operation
[  112.170000] [mmc]: found data error, need to send stop command !!
[  112.170000] [mmc]: sdxc_send_manual_stop(L892): sdc 0 send stop command failed
[  112.180000] [mmc]: sdxc_request_done(L1114): smc 0 err, cmd 13,  RTO !!
[  112.190000] mmcblk0: error 110 sending status command, retrying
[  112.200000] [mmc]: sdxc_request_done(L1114): smc 0 err, cmd 13,  RTO !!
[  112.200000] mmcblk0: error 110 sending status command, retrying
[  112.210000] [mmc]: sdxc_request_done(L1114): smc 0 err, cmd 13,  RTO !!
[  112.220000] mmcblk0: error 110 sending status command, aborting
[  112.220000] end_request: I/O error, dev mmcblk0, sector 0
[  112.220000] Buffer I/O error on device mmcblk0, logical block 0
[  112.240000] [mmc]: sdxc_request_done(L1114): smc 0 err, cmd 18,  RTO !!
[  112.250000] [mmc]: sdxc_request_done(L1118): In data read operation
[  112.250000] [mmc]: found data error, need to send stop command !!
[  112.260000] [mmc]: sdxc_send_manual_stop(L892): sdc 0 send stop command failed
[  112.270000] [mmc]: sdxc_request_done(L1114): smc 0 err, cmd 13,  RTO !!
[  112.270000] mmcblk0: error 110 sending status command, retrying
[  112.280000] [mmc]: sdxc_request_done(L1114): smc 0 err, cmd 13,  RTO !!
[  112.290000] mmcblk0: error 110 sending status command, retrying
[  112.290000] [mmc]: sdxc_request_done(L1114): smc 0 err, cmd 13,  RTO !!
[  112.300000] mmcblk0: error 110 sending status command, aborting
[  112.310000] end_request: I/O error, dev mmcblk0, sector 0
[  112.310000] Buffer I/O error on device mmcblk0, logical block 0
[  112.310000] end_request: I/O error, dev mmcblk0, sector 8
[  112.310000] Buffer I/O error on device mmcblk0, logical block 1
[  112.310000] end_request: I/O error, dev mmcblk0, sector 16
[  112.310000] Buffer I/O error on device mmcblk0, logical block 2
[  112.310000] end_request: I/O error, dev mmcblk0, sector 24
[  112.310000] Buffer I/O error on device mmcblk0, logical block 3
[  112.350000] [mmc]: sdxc_request_done(L1114): smc 0 err, cmd 18,  RTO !!
[  112.360000] [mmc]: sdxc_request_done(L1118): In data read operation
[  112.360000] [mmc]: found data error, need to send stop command !!
[  112.370000] [mmc]: sdxc_send_manual_stop(L892): sdc 0 send stop command failed
[  112.380000] [mmc]: sdxc_request_done(L1114): smc 0 err, cmd 13,  RTO !!
[  112.380000] mmcblk0: error 110 sending status command, retrying
[  112.390000] [mmc]: sdxc_request_done(L1114): smc 0 err, cmd 13,  RTO !!
[  112.400000] mmcblk0: error 110 sending status command, retrying
[  112.400000] [mmc]: sdxc_request_done(L1114): smc 0 err, cmd 13,  RTO !!
[  112.410000] mmcblk0: error 110 sending status command, aborting
[  112.420000] end_request: I/O error, dev mmcblk0, sector 0
[  112.430000] [mmc]: sdxc_request_done(L1114): smc 0 err, cmd 18,  RTO !!
[  112.430000] [mmc]: sdxc_request_done(L1118): In data read operation
[  112.440000] [mmc]: found data error, need to send stop command !!
[  112.450000] [mmc]: sdxc_send_manual_stop(L892): sdc 0 send stop command failed
[  112.450000] [mmc]: sdxc_request_done(L1114): smc 0 err, cmd 13,  RTO !!
[  112.460000] mmcblk0: error 110 sending status command, retrying
[  112.470000] [mmc]: sdxc_request_done(L1114): smc 0 err, cmd 13,  RTO !!
[  112.470000] mmcblk0: error 110 sending status command, retrying
[  112.480000] [mmc]: sdxc_request_done(L1114): smc 0 err, cmd 13,  RTO !!
[  112.490000] mmcblk0: error 110 sending status command, aborting
[  112.490000] end_request: I/O error, dev mmcblk0, sector 0
[  112.490000] end_request: I/O error, dev mmcblk0, sector 8
[  112.490000] end_request: I/O error, dev mmcblk0, sector 16
[  112.490000] end_request: I/O error, dev mmcblk0, sector 24
[  112.510000] [mmc]: sdxc_request_done(L1114): smc 0 err, cmd 18,  RTO !!
[  112.520000] [mmc]: sdxc_request_done(L1118): In data read operation
[  112.530000] [mmc]: found data error, need to send stop command !!
[  112.530000] [mmc]: sdxc_send_manual_stop(L892): sdc 0 send stop command failed
[  112.540000] mmcblk0: error 110 sending status command, retrying
[  112.550000] [mmc]: sdxc_request_done(L1114): smc 0 err, cmd 13,  RTO !!
[  112.550000] mmcblk0: error 110 sending status command, retrying
[  112.560000] [mmc]: sdxc_request_done(L1114): smc 0 err, cmd 13,  RTO !!
[  112.570000] mmcblk0: error 110 sending status command, aborting
[  112.570000] end_request: I/O error, dev mmcblk0, sector 0

It seems to me that the SD slot is "broken", how check that ?

Maybe someone will advise what to do?

Thanks.

JohnS

#1
October 24, 2019, 01:42:22 PM
You might like to try the correct spelling of their email :)

support not suppot

John

chjohn

#2
October 24, 2019, 03:44:28 PM
Just in case checked, but in mail message address correct.

A mistake in this post.

chjohn

#3
October 24, 2019, 04:15:45 PM
Try different images Linux, noticed that the start error description is different.

Code Select
U-Boot SPL 2012.10-04265-gf355d60 (Dec 15 2012 - 13:08:48)
DRAM: 512MB
SUNXI SD/MMC: 0
spl: mmc blk read err - 0
### ERROR ### Please RESET the board ###

or

Code Select
U-Boot SPL 2013.07-rc1 (Jun 20 2013 - 23:55:50)
Board: A13_MID
DRAM: 512MB
CPU: 1008000000Hz, AXI/AHB/APB: 3/2/2
SUNXI SD/MMC: 0
spl: mmc blk read err - 0
### ERROR ### Please RESET the board ###

After searching with hex-editor on SD cards, the text "gf355d60" or "2013.07-rc1", I fount it in the region of 0x6000 offset.

The eGON.BT0 signature is in the 0x2000 offset region.

It looks like the SD slot works, but still something prevents normal boot :(
Print
Go Up Pages1
User actions