msp430-jtag-iso can not set up driver win10 windows 7. Topic does not help.

[mic537]

Hello!
When I connect MSP430-JTAG-ISO I get it as USB Serial Port ( COM4)
OLIMEX MSP GUI pogramm does not see programmer. ( dlls all from driver)

I tried to install drivers as you described it on one of posts for windows10 but
did not get success. That is my way:

Driver:  OLIMEX MSP430-DLL drivers 1.042

Remove protect against unsigned drivers. That is OK.

Next steps I get only problems:

1. In Select device manually no Olimex producer
http://joxi.ru/gmvbaxYIq3O37m

2. When I press "Have a disk"
and choose manually olimex_jtags.inf
http://joxi.ru/VrwbRkYI7M9MBA
There is no MSP430-JTAG-ISO in the list:
http://joxi.ru/EA4XglKuoB78DA

3 When I choose MSP JTAG TINY from list and try to set up driver
I got blue screen and Windows Error.
I tried all variants from list and in all got Windows blue screen.

win10 -64, win7 -64 , win7 -32
In all the same result.

But one positive result came, the Olimex producer started to appear in
list of devices:
http://joxi.ru/n2YZlwdFb8NlbA

When I try to install MSP OLIMEX Tiny from list I get blue screen on windows 7
and windows 10 sometimes says  "Style of INF is different than was  requested":

http://joxi.ru/DmBzw9JhJDGn4m

When I try to update driver for USB Serial port by choosing folder Driver,
it says that up to date driver already installed.

What to do?

[LubOlimex]

I see you have approached the problem properly.  Looking at olimex_jtag.inf I see no mention of MSP430-JTAG-ISO. Instead of the inf in the main folder, try to use the inf files in folder "64bit" - "ftdiport.inf" and "ftdibus.inf". These seem to have it mentioned.

Maybe also try the drivers from the previous release. Use the drivers from the "Drivers" folder here: https://www.olimex.com/Products/MSP430/JTAG/_resources/OLIMEX-MSP430-DLL-drivers-1.039.zip

If these drivers work, still use the DLLs from the newer archive (1.042).

Notice that you if you change the USB port used for MSP430-JTAG-ISO you would need to again disable the driver signature enforcement and install the driver.

[mic537]

I shuffled all possible variants from both folders ( v 1.042, v1.039) No positive results. If I choose folder Driver - they say: driver up to date, If I dig into devices, olimex, inf file there were not MSP430-JTAG-ISO in them, only rfjtag or msp tiny or others. After many hours of experiments I "gained" to situation when my Windows crashs any time I insert usb to jtag. Finita la comedy! I've got only one idea that Russians hackers not only influenced Trump's election but spoiled these drivers too. Other ideas?

[LubOlimex]

Can you try with this inf: ftp://staging.olimex.com/Lub-clients/olimex_jtags_edit.inf ?

It is the one from the latest version but I added the name, VID and PID of the ISO programmer.

It requires disabling the signature enforcement.