Olimex ARM-USB-OCD-H and its RS232

[lim]

Pardon my ignorance.

typing dmesg in Ubuntu, I get the following messages:

Product: Olimex OpenOCD JTAG ARM-USB-OCD-H
[ 9062.541146] usb 1-2: SerialNumber: OL87B474
[ 9062.552768] ftdi_sio 1-2:1.1: FTDI USB Serial Device converter detected
[ 9062.552798] usb 1-2: Detected FT2232H
[ 9062.552992] usb 1-2: FTDI USB Serial Device converter now attached to ttyUSB1

Correct me if I am wrong, with the physical RS-232 port to which one end of the serial cable connect to, and the other end of the cable connects to the target board, is it correct?

Appreciate your comments.

[LubOlimex]

The RS232 connector of ARM-JTAG-OCD-H serves a USB-RS232 converter. For example, if your computer has no RS232 port, you can use the one on ARM-JTAG-OCD-H. It has nothing to do with the JTAG debugging or programming, it is a separate thing. The levels are +/- 6V.

The programming interface is the JTAG connector that gets connected to the target.

[lim]

got that. thanks