LCD10-METAL-FRAME complete dimensions

[ardavast]

Hello,

I'm making a PCB which attaches to the back of the LCD10-METAL-FRAME. I've looked at this diagram: https://www.olimex.com/Products/OLinuXino/LCD/LCD10-METAL-FRAME/resources/LCD10-METAL.pdf

There are 8 holes in total. The 6 holes in the middle (the ones which are dark yellow in the pdf) are the same as the holes on the A20, so I was able to get their dimensions from here: https://www.olimex.com/Products/OLinuXino/A10/_resources/Ax0-OLINUXINO-LIME-dimensions.png.  I'm searching for the dimensions of the remaining two holes. Do you have a more detailed drawing than this one, which shows them?

Currently my board outline looks like this: https://i.imgur.com/5BqN6Yt.png

Because I don't have the exact dimensions, I made two fairly large rectangular openings to the right, which will probably work, but still, I would prefer to be more precise than that.

[LubOlimex]

Nice project, sadly, we don't have diagram or drawing for LCD10-METAL-FRAME. You'd have to measure dimensions that are not related to the LIME board empirically.