AVR-T32U4 WINDOWS 7 (64 Bits)

[solid]

Hi,
I cannot install driver for AVR-T32U4 with Windows 7 (64 bits). Any idea?

Thanks

[LubOlimex]

Hello there,

The drivers you need are located in YOUR_DRIVE\Program Files (x86)\arduino-1.0.1\drivers by default. If when you manually point the Windows driver installer/updater to that folder it is unable to find a suitable driver then you have to perform a bootloader update.

The procedure is explained in the manual and now I have uploaded the needed .elf file at our web site: https://www.olimex.com/Products/Duino/AVR/AVR-T32U4/resources/avr32u4_bootlader_blink_demo_leonardo_v2_ard101.elf. You will need a programmer with 6pin ICSP connector. If you lack such and you want to program the device just once I advice you to borrow from a friend or a nearby electronics shop.

Best regards,
Lub/OLIMEX

[solid]

It works perfectly.
Thanks