A20 and A13-LCD7 + Android

[Mouchon]

Hello,

I received my A20 OlinuXino NAND yesterday with the LCD7TS

When i start the board with the HDMI no issue all is working well except the ethernet.
When i connect the LCD screen i have a resolution problem and the touch screen doesn't work. ( i have see on other topic that this is currently not supported) But can some one tell me how i can change the resolution
of android to use the 7'' LCD ?

I have also see that there is a android A20 sdk can some one point me on how to build to let me push it on a SD

Booting linux on SD is working well and i configured correctly the LCD. Still need to try to enable the TS.

Tanks a lot

This board is really fun to play with it.

[Mouchon]

I was able to compile the kernel from the A20 SDK and to enable my  A13-LCD7
following the different help on the wiki and the forum :-) I can provide procedure if needed.

But i still have a questioni. It is possible to enable both hdmi and LCD at same time ?

Regarding the android resolution i was not yet able to use it on the LCD. Any pointer will be apreciate.

Philippe