Android nand image and MOD-WIFI-RTL8188

[yoann_q]

hi,
does the MOD-WIFI-RTL8188 is supported when i boot on Android internal NAND  (using latest image) and plug it on a USB hub ?
i do it and i can't activate the WIFI
thanks in advance

[vince747]

I didn't think current Android image support USB wifi.  I tried to build a custom Android image to have this support but couldn't find the correct settings for the original built.

[vince747]

Got hold of the setup configuration file and found that USB wifi was enabled.  Will try to find out why the usb wifi not working.

[yoann_q]

i compile a nand image since 12 h, i don't think it will be a success because it's a lightweight PC
appart of that i extract the config from the nand image and you're right the wifi usb is enabled , see the COMMON  _SYS_CONFIG100000.fex file : https://docs.google.com/file/d/0B263kbYa7xtGNHJfZFhKUFpjUUU/edit?usp=sharing
Note : i don't see difference between the nand configuration and the configurations delivered with the SDK
this evening i'll test the recompiled image (if it's a success) and use a sdcard to flash the sdcard version
best regards

[yoann_q]

so
the MOD-WIFI-RTL8188 status is :
with the official NAND image  --> doesn't work  i've an error message with bcm4329 no wifi module found
with the official SDCARD image --> works   
BUT
my wireless keyboard (RII type):
with the official NAND image  --> works   
with the official SDCARD image --> doesn't work 

qst to olimex : is it possible to give us the config use to generate android ? , some people will be interested

i'll try to generate a NAND image with correct configuration ... for the two case of course
it's very long