A13 : Facing Problem in booting Linux from SD card

[Harsimran singh]

Hello ,
I am trying to boot Linux image from SD card on A13 wifi using VGA monitor LCD display(800 * 600). When i inserted the sd card and power it on then it neither boots Android from NAND nor Linux from SD card and on Display message appeared "No input Connected" , It is because  monitor is not receiving any signal from the board. When i remove the SD card then Android boots normally from NAND.

Can anybody help me out in this??

Thanks

[JohnS]

But which image exactly?  It probably isn't set up right...

John

[Harsimran singh]

I am trying to boot linux kernel with angstrom root file system from SD card. I am just doing as per the following link , the only difference is of file system :
https://www.olimex.com/wiki/Build_Bootable_SD_Card_with_Debian

I have also changed the script.bin file and configure it to get the output on the VGA but still output is not coming.