cross compiling

[khamar24]

Hi,

I am getting an error while......  make a13-olinuxino CROSS_COMPILE=arm-linux-gnueabi-

/bin/bash: arm-linux-gnueabi-gcc: command not found
/bin/bash: arm-linux-gnueabi-gcc: command not found
dirname: missing operand
Try `dirname --help' for more information.
Configuring for A13-OLinuXino - Board: sun5i, Options: A13_OLINUXINO,SPL,STATUSLED=201,CONS_INDEX=2
make
/bin/bash: arm-linux-gnueabi-gcc: command not found
/bin/bash: arm-linux-gnueabi-gcc: command not found
dirname: missing operand
Try `dirname --help' for more information.
make[1]: Entering directory `/home/essl/olinuxino/u-boot-sunxi'
Generating include/autoconf.mk
/bin/bash: line 3: arm-linux-gnueabi-gcc: command not found
Generating include/autoconf.mk.dep
/bin/bash: line 3: arm-linux-gnueabi-gcc: command not found
make[1]: Leaving directory `/home/essl/olinuxino/u-boot-sunxi'
/bin/bash: arm-linux-gnueabi-gcc: command not found
/bin/bash: arm-linux-gnueabi-gcc: command not found
dirname: missing operand
Try `dirname --help' for more information.
make[1]: Entering directory `/home/essl/olinuxino/u-boot-sunxi'
/bin/bash: arm-linux-gnueabi-gcc: command not found
arm-linux-gnueabi-ld: error while loading shared libraries: libbfd-2.22.so: cannot open shared object file: No such file or directory
Generating include/spl-autoconf.mk
/bin/bash: line 3: arm-linux-gnueabi-gcc: command not found
Generating include/tpl-autoconf.mk
/bin/bash: line 3: arm-linux-gnueabi-gcc: command not found
arm-linux-gnueabi-gcc -DDO_DEPS_ONLY \
      -g  -Os   -ffunction-sections -fdata-sections -fno-common -ffixed-r9 -msoft-float  -D__KERNEL__  -I/home/essl/olinuxino/u-boot-sunxi/include  -I/home/essl/olinuxino/u-boot-sunxi/arch/arm/include -fno-builtin -ffreestanding -nostdinc -isystem  -pipe  -DCONFIG_ARM -D__ARM__     -march=armv5 -Wall -Wstrict-prototypes       \
      -o lib/asm-offsets.s lib/asm-offsets.c -c -S
/bin/bash: arm-linux-gnueabi-gcc: command not found
make[1]: *** [lib/asm-offsets.s] Error 127
make[1]: Leaving directory `/home/essl/olinuxino/u-boot-sunxi'
make: *** [a13-olinuxino] Error 2

[JohnS]

Command not found means you have failed to install it.

Look up what is needed and hot install on your OS.  google is your friend in these cases.

John

[khamar24]

Dear John, Thank for ur reply.

I installed the tool chain successfully. By command-  apt-get install gcc-4.6-arm-linux-gnueabi ncurses-dev uboot-mkimage build-essential git.

The output is

eading package lists... Done
Building dependency tree       
Reading state information... Done
Note, selecting 'libncurses5-dev' instead of 'ncurses-dev'
git is already the newest version.
libncurses5-dev is already the newest version.
uboot-mkimage is already the newest version.
gcc-4.6-arm-linux-gnueabi is already the newest version.
build-essential is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 620 not upgraded.

[JohnS]

Note carefully the file names.  If they have 4.6 in them think a bit

John