Help needed with ethernet for A20-OLINUXINO-MICRO

[vishnuj17]

Hi,

I'm a newbie to A20.When i try to interface A20_GPIO using python.. its showing error "Module not found". So I tried to install A20_GPIO package,but is getting into trouble since I'm not getting internet connection to my board which I suspect is since ethernet is not working. As said in the user manual, I enabled the card using the command 'dhclient eth0'. But stil network is not getting connected.

Please help me on this.

Thanks,
Vishnu

[MBR]

Does your network support DHCP? And is there a connection, at least on link level? (Are the LEDs switch/router/whatever on?)

[Lurch]

What is the output of the command ifconfig?

[Couby]

I also followed the recommanded actions but still have difficulties getting it running after a reboot.

Do we need to execute 'dhclient eth0' at each reboot ?

There is a DHCP in my network and connection was ok in my last attempt.

[jlucius]

I am always doing

ifconfig eth0 up
dhclient eth0

I don´t know if the first step is needed but when I boot the interface is down. This should be fixed in the image if possible.

[Couby]

Oki, would it work adding a shell script with that in /etc/init.d ? (sorry I'm a Linux-n00b... )

[Couby]

Oki, would it work adding a shell script with that in /etc/init.d ? (sorry I'm a Linux-n00b... )

For that, simply edit /etc/network/interfaces (uncomment auto eth0) :

Code Select Expand

auto eth0
iface eth0 inet dhcp

Thank you Guigui for the tip .

[dmalik]

with this confing in /etcnetwork/interfaces no ethernet network !
i use micro sd with a20-lime2_debian_3.4.90_release_2.img.
thanks forr help
dm

[Gerrit]

the topic is about a A20-OLINUXINO-MICRO is you are using that one or a A20-OLinuXino-LIME then the ethernet will not work with a lime2 image like you are talking about