How to configure QT5.3 to develop app. for Olinuxino A10

[dikris]

Hello,

Is there any step by step guide of how to configure QT5.3 (toolchain, compilers, settings, etc...) in order to develop an application for Olinuxino A10 lime?

My host PC has Ubuntu 14.04.
Target: Olinuxino A10 lime

[Cosik]

Hi dikris,

Some times ago I had a same problem. If you didn't resolve it, please write to me, and I will help you.

I'm waiting for editor acc on Olimex wiki to write HowTo article about Qt5 on boards.

[Kafanti]

Hi dikris,

Some times ago I had a same problem. If you didn't resolve it, please write to me, and I will help you.

I'm waiting for editor acc on Olimex wiki to write HowTo article about Qt5 on boards.

Hello Cosik,

I have just bought my A10Lime and trying to install Qt on target device and also on my host device. I have found few articles on it and i guess they all out of date. I just leave "cross-compile" approach later. Right now trying to install Qt on device.

Device spec: A10 Lime Rev C and booting from SD card which i have loaded official debian release 3.

If you are still active on A10 and if you would be able to help, i would be appriciated.

Thank You.