Olinuxino don't start

[loren127]

When powe-on Olinuxino A10 light briefly the two lights of the network card, but not be connected to the video signal, and pressing all three buttons does not change the state, always yellow light.
Now about SD formatted fat32 there image debian official linked here: https://www.olimex.com/wiki/A10-OLinuXino-LIME

[loren127]

When powe-on Olinuxino A10 light briefly the two lights of the network card, but not be connected to the video signal, and pressing all three buttons does not change the state, always yellow light.
Now about SD formatted fat32 there image debian official linked here: https://www.olimex.com/wiki/A10-OLinuXino-LIME

NOBODY REPLY'S??

[JohnS]

I found it impossible to understand.

John

[loren127]

Linuxino apparently don't work!
The precision answer is this:
Is normal who the SD with the image of Debian linked in the page manufacturer web-site, don't put any turn-on the monitor but says "no signal".
The video output don't work???

In addiction the led of the power is always yellow, never green or another colours!

[ottosr]

clean your sd and dd if=/dev/null of=/dev/sdX where X is the location of your SD. and install the Debian image again. Helpt me out of an sort off problem.