A20 SOM USB Mass storage (Solved)

[anthonym]

Hi All,

I am trying to get the g_mass_storage USB gadget working so I can access the contents of the SD card via a PC.

I have managed to get it working by including the relevant bits in the kernel and then;

insmod /lib/modules/3.4.102/kernel/drivers/usb/gadget/g_mass_storage.ko file=/dev/mmcblk0p1 stall=0

This seems to work fine except the USB only enumerates the 2nd time it is connected on a given boot. This seems to be port specific so for example with a 4 port usb hub;

1st connection to Port 1 - Nothing
2nd connection to Port 1 - Working
1st connection to Port 2 - Nothing
2nd connection to Port 2 - Working
etc
etc

Once it has worked with a given port it will continue to function (if unplugged and re-plugged) until the A20 is rebooted and then it needs to be plugged in twice again in order to get it working.

Anyone got any ideas?

Thanks

[Gerrit]

Not any help but i noticed the same with the A10 and A13 so not specific for the A20 SOM

[anthonym]

Thanks for the reply.

Maybe an Olimex / Sunxi USB OTG driver issues then.

Anybody else had any issues using the OTG port?

Cheers

[anthonym]

Fixed it, changing the usb_port_type to 0 in the script.bin makes the device detected first time every time.

Not a problem for this project as the USB OTG port is always a device port.

Must be a problem in the OTG driver somewhere.