Unable to connect to JTAG. Zadig reads VID as 0x0403 and PID as 0x6010.

[priya]

Hi all,

I am trying to connect to olimex_arm_usb_tiny JTAG adapter but I see that the VID and PID are set to 0x0403 and 0x6010 instead of 0x15BA and 0x002A as mentioned in .inf driver file. I am using Windows 7 64 bit version and it's recognizing the device as USB Port and USB Composite devices and I am unable to manually update the driver either because the VID and PID don't match. I do see the red LED on the jtag adapter and my target seems to go into debug mode (it at least stops running) as soon as I connect the jtag but I am unable to flash any code because the drivers don't work. Please give me your suggestions!

By the way, I also tried using Zadig and it sees the device with VID 0x0403 and PID 0x6010 as well.

Thanks!!
Priya