MSP-430-JTAG-ISO-MK2 external power source minimum voltage

[Nurol]

hi,

https://www.olimex.com/Products/MSP430/JTAG/MSP430-JTAG-ISO-MK2/resources/MSP430-JTAG-ISO-MK2.pdf read document.

I know powering the device from external source of power (12V) or via the USB(5V).

But,What is the minimum voltage applied to the external product?

Waiting for your help.

Nurol.

[LubOlimex]

Hey Nurol,

When using only USB power - 40mA.

When using 12V external supply - 300mA.

Best regards,
Lub/OLIMEX

[Nurol]

hi LubOlimex,

Thank you for information but what is mınımum voltage ?

[LubOlimex]

Hey again,

It is 1.8V. There is also algorithm detecting the voltage applied on the controller - if it is below 0.7V (I believe) it will attempt to power it to programmable levels.

Regards,
Lub/OLIMEX

[Nurol]

hi LubOlimex,

Thank you for your interest.

The JACK input so +12VDC,I'm asking minimum voltage?

[LubOlimex]

Hi again,

Only 12VDC if choosing to use debugger powering - no more no less.

Best regards,
Lub/OLIMEX