[IMAGE] A13(-WIFI) Debian (now Ubuntu) + xfce flashable (Updated: 08 Mar: R18)

[jwischka]

Yes i know this, but your kernel is good, it need just ethernet mod.. i try to recompile my own kernel, but it isn't good like yours, that's why i want to recompile yours

Let me boot into Linux and check...

[jwischka]

Yes i know this, but your kernel is good, it need just ethernet mod.. i try to recompile my own kernel, but it isn't good like yours, that's why i want to recompile yours

Adding various usb support as a module. Recompiled, rebuilding, updating, and will re-upload.

[maurosk]

Thanks jwischka, i hope to return the favor

[jwischka]

Thanks jwischka, i hope to return the favor

I just hope the kernel works...

[leo]

Adding various usb support as a module. Recompiled, rebuilding, updating, and will re-upload.

Or just send him your .config 
Even with a new kernel he needs the kernel sources to build the asix module against it.

[jwischka]

Adding various usb support as a module. Recompiled, rebuilding, updating, and will re-upload.

Or just send him your .config 
Even with a new kernel he needs the kernel sources to build the asix module against it.

I built all the modules. I'll try to tar the lot up, in addition to doing another full blown image with updated goodies...

[maurosk]

good jwischka, i'm look eagerly your new upload

[Ekkehard]

Yup - I'll second that motion.  Would be a shame if we all had to re-invent the wheels that jwischka has already invented AND trued so beautifully :-)  For starters, a .config file would be much appreciated.

Taken care of - you guys are just too fast for me :-)

And yes, ASIX Electronics is the manufacturer of chip that's in my Ethernet adapter (SABRENT NT-USB20) as well.

[jwischka]

Yup - I'll second that motion.  Would be a shame if we all had to re-invent the wheels that jwischka has already invented AND trued so beautifully :-)  For starters, a .config file would be much appreciated.

Taken care of - you guys are just too fast for me :-)

And yes, ASIX Electronics is the manufacturer of chip that's in my Ethernet adapter (SABRENT NT-USB20) as well.

Link to kernel/modules/firmware
.config

Will update with a new image soonish.

[maurosk]

It works, good job

[jwischka]

R5 released.

Get current version (R5) here.

Updated kernel with usb networking support as modules, updated packages.

[Ekkehard]

So let me put this straight:

• Yesterday afternoon I started to evaluate a new processor board
• I put on a nicely packaged piece of OSS, but ran into a problem
• I posted the problem here on this forum the same evening - turns out, I was asking for an unsupported feature - so, in my book, a wish, not a bug report
• The very next morning the author of the OSS posts a new release with the wish included, that actually works (minor detail - I know)
• What do I call that?  Freaking A-M-A-Z-I-N-G

Yes, jwischka, you are freaking A-M-A-Z-I-N-G!!!  Can't thank you enough!!!!  You saved me oodles of time!!

[atal]

Hello guys,
I have here A13 and I cannot successfully login into system. I prepared SD card with your R5 system. No problem, after power up the kernel start and then I am prompted to insert username/password in console. But when I enter olinuxino/olinuxino then there is flashed very quickly welcome text "...ABSOLUTLY NO WARRANTY, etc" and then the screen is cleared and I see just login prompt again (debian login:).

Do you have any advice how to solve this my problem? I tested two 4GB SDcard with my coleague for sure, but same trouble. Basic Debian system without X from your website I have successfully tested with 2GB SDcard - login and using system in console without problems. VGA monitor is used. 

Jaromir
   

[jwischka]

Have you tried the R4 image? If not, can you? I didn't fully test the R5 card, so there may be something up. Unfortunately there is no power at my building right now, so I can't test it for you. :/

Hello guys,
I have here A13 and I cannot successfully login into system. I prepared SD card with your R5 system. No problem, after power up the kernel start and then I am prompted to insert username/password in console. But when I enter olinuxino/olinuxino then there is flashed very quickly welcome text "...ABSOLUTLY NO WARRANTY, etc" and then the screen is cleared and I see just login prompt again (debian login:).

Do you have any advice how to solve this my problem? I tested two 4GB SDcard with my coleague for sure, but same trouble. Basic Debian system without X from your website I have successfully tested with 2GB SDcard - login and using system in console without problems. VGA monitor is used. 

Jaromir
   

[atal]

Thanks for your fast reply. We tested R4 with same troubles yesterday.