enable uart0

[sandro]

hi to all.
In the a13-olinuxino i have only an uart active (uart1).

root@debian:~# dmesg | grep ttyS
[    0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait loglevel=8 panic=10
[    0.410000] sunxi-uart.1: ttyS0 at MMIO 0x1c28400 (irq = 2) is a U6_16550A

[    0.430000] console [ttyS0] enabled

I see on the serigraphy that it have another uart0. How I can enable it?

Thanks

[sandro]

I have the rev C

[vinifr]

Look at this post: https://www.olimex.com/forum/index.php?topic=420.0

I still do not know how to enable uart0, but information can help you.