A13 Debian Mod IO

[Autom01]

Hello all,

i successfully compiled https://github.com/OLIMEX/OLINUXINO/tree/master/SOFTWARE/A13/MOD-IO
on a13 board.

I tried to ./mod-io -relay 0x58 0x01 with the 3 differents i2c ports.

Here is how i connected the board:

https://drive.google.com/open?id=0BzzEnrqUXGfWanh1ZS1wcUN0ZUxRaEFYWVhVM1NtMFVrWS1z

[Autom01]

I clicked on post too fast,

I you have any advise !! feel free to hlp me,

Thx in advance,
Charles

[LubOlimex]

Hey, in your setup the relays are underpowered. The relays can't be powered by 3.3V from the UEXT.

You need to provide external power supply to the MOD-IO if you want to use the relays.