USB-ETHERNET-AX88772B not working with A13

[bimodh]

Hi,


I have my OLinuXino A13 board loaded with linux as described here(http://olimex.wordpress.com/2012/10/12/building-bootable-sd-card-with-debian-linux-image-for-a13-olinuxino/). And I have a USB-ETHERNET-AX88772B. I tried to connect the USB-ETHERNET-AX88772B with OLinuXino A13. But nothing is happening. The LED itself is not blinking in the USB-ETHERNET-AX88772B. Even, I rebooted the board several times and even plugged into different USB ports too, still nothing happened.

What might be the problem? Do i need no do something else too?

[jwischka]

Your kernel probably doesn't support it. Flash my R7 image and see if that works.

[bimodh]

"Flash my R7 image" I didnt understand that....

What is that R7 image?
And as i am using OLINUXINO A13 without wifi, it does'nt have a NAND. So how to flash it?

[JohnS]

Flash to an SD card.

The R7 is towards the end og this thread (flagged "IMAGE")
Debian + xfce +wpa-supplicant flashable .img

[jwischka]

Flash to an SD card.

The R7 is towards the end og this thread (flagged "IMAGE")
Debian + xfce +wpa-supplicant flashable .img

Or in the first post.

thread here